OK,
update on my delima.
First, thanks to all that can't slep because of this, sorry.
second, heres the lab layout
AP-Switch-backbone
still have pings and dns resolution, but no browser traffic.
I have all other services, including microsoft file sharing.
that is all
John
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of shoffman
Sent: Tuesday, June 24, 2003 11:29 AM
To: [EMAIL PROTECTED]
Subject: RE: [smartBridges] non Smartbridges CPE
It almost sounds like there were (are) some routing rules that were set-
up on the Orinoco that disappear when using the APPro. I would suggest
that you check to see that there aren't any routing rules that you may
have removed that controlled your Port 80 traffic...
-----Original Message-----
From: "John Mooring" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Date: Mon, 23 Jun 2003 18:52:51 -0400
Subject: RE: [smartBridges] non Smartbridges CPE
> Senni,
>
> I'll answer these as you gave them to me,
>
> q Did you try accessing the http by directly connecting the
AP to the
> PC
> (using cross over adaptor)
>
> a yes, i was tethered at the top of a water tank with my
laptop for
> about 3
> hours with a cell phone in one hand and the laptop tethered to my bod.
> No
> change.
>
> as for the rest, yes. I now am trying this with the @[EMAIL PROTECTED]@#
thing
> on a
> bench in my lab. The firmware was up to date and their is a pizza and
> pub
> calling loudly.
>
> Thank all for the day and maybe I will have a revelation of
Brillience
> in
> my travels this evening.
>
> John
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of Seeni
> Sent: Monday, June 23, 2003 6:39 PM
> To: [EMAIL PROTECTED]
> Subject: RE: [smartBridges] non Smartbridges CPE
>
>
> John,
> Did you try accessing the http by directly connecting the AP to the PC
> (using cross over adaptor)? Please verify the following.
> 1. Set the PC IP address (same subnet range)
> 2. Set the IP and correct GW IP address
> 3. Set the correct primary port=Ethernet
> 4. Ping the ISP's DNS ip address
> 5. browse the web.
> What kind of CPE devices you are using to associate with AP?
> If above results are successful, associate using CPE wireless unit and
> change the preamble to "short" and see the results (by default AP set
> to
> "long). If you find no effect, put back to "long".
>
> If still problem exists, please restore the device to the factory
> default (pressing reset for 20 seconds) and try again the same.
>
> Thanks
>
> Seeni, SB support
>
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of John Mooring
> Sent: Tuesday, June 24, 2003 5:41 AM
> To: '[EMAIL PROTECTED]'
> Subject: RE: [smartBridges] non Smartbridges CPE
>
> Seeni,
>
> First Thank you for actually sounding like you want to help, The
> rest of
> these responses just disagree with me.
> I deployed this AP with just changing its IP address, everything
> else is
> factory. I even left it open and easily accessable for the test. I can
> do
> everthing but surf the NET. I first thought that this would be a
> problem
> with their browser, so I swapped in my laptop, same issue. Actually
> nothing
> worked until I put the orinocco equipment back on the tower.
>
> Don't missread this, I am not Bitching or complaining, just want
> some
> honest answers to get my clients going.
>
> John
>
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of Seeni
> Sent: Monday, June 23, 2003 2:34 PM
> To: [EMAIL PROTECTED]
> Subject: RE: [smartBridges] non Smartbridges CPE
>
>
>
> Hi John,
> The airpointPRo and airbridge series are 802.11b standard based
> wireless
> devices. The additional features and functionality will be varies
> between the different manufactures products.
> When you use sB's AP, the port 80 not responding means, could you
> please
> give us the detail information of the AP's setup like firmware,
> configuration etc..
>
> Thanks
>
> Seeni, SB support
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of John Mooring
> Sent: Tuesday, June 24, 2003 1:52 AM
> To: '[EMAIL PROTECTED]'
> Subject: [smartBridges] non Smartbridges CPE
>
> OK,
>
> I have deployed many WET-11 CPE's, work great with orinocco AP's
> and my
> home made Linux loaded AP's. When i replaced the Orinoco stuff with
> Smartbridge AP's all port 80 traffic stops.
>
> strange, but true. Airbridges can pass everything, but no other
> branded CPE
> can. I thought these radios stayed in the 802.11 b standard, if not let
> me
> know.
>
> John
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://198.63.203.6
>
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://198.63.203.6
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://198.63.203.6
>
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://198.63.203.6
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://198.63.203.6
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://198.63.203.6
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://198.63.203.6
