We
are developing an enhanced version of powershot for the outdoor units(dynamic
power supply) which will fulfill the higher voltage requirements. It will be
released very soon.
For
the 18V requirement please follow the below spec.
Powering CAT5 cable
lengths of greater than 160 feet or 50 meters
In case you need to power the device with CAT5 Cable lengths greater than 160
feet or 50 meters (to a maximum of 327 feet or 100 meters) then a DC power
supply adapter of output voltage between 15V DC and 18V DC needs to be procured
independently from third party sources.
To help you procure the correct power supply adapter, the specification of the
power adapter is :-
|
Output Voltage Range
|
between 15V to 18V
Regulated (preferred 18V max)
|
|
Current Ratings
|
1 Ampere (minimum)
|
|
Type of Plug
|
Barrel Type
|
|
Plug Polarity
|
outer body = +ve,
center = -ve
![]()
|
|
Diameter of plug
|
Inner Diameter of the
plug = 2.5mm
Outer Diameter of the plug = 5.5mm
|
|
Length of the plug
|
10mm or more
|
The supplied standard 12V DC power adapter can power the devices upto 160 feet
or 50 meters only with standard CAT5 Cables.
Thanks
Seeni,
SB support
-----Original
Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of shoffman
Sent: Saturday, June 28, 2003 1:00 AM
To: '[EMAIL PROTECTED]'
Subject: [smartBridges] POE Devices
I
know this was talked about but can't find the thread, so asking again
(sorry
for the repeat).
Anybody
find the higher powered power supplies that SB wants us to use
for
longer POE runs?
Thanks
The
PART-15.ORG smartBridges Discussion List
To
Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges
<yournickname>
To
Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives:
http://archives.part-15.org
image001.gif