Seeni, 

Just what I needed, THANKS!!



-----Original Message-----
From: "Seeni" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Date: Sat, 28 Jun 2003 05:13:42 +0800
Subject: RE: [smartBridges] POE Devices

> We are developing an enhanced version of powershot for the outdoor
> units(dynamic power supply) which will fulfill the higher voltage
> requirements. It will be released very soon.
> 
>  
> 
> For the 18V requirement please follow the below spec.
> 
> Powering CAT5 cable lengths of greater than 160 feet or 50 meters 
> 
> In case you need to power the device with CAT5 Cable lengths greater
> than 160 feet or 50 meters (to a maximum of 327 feet or 100 meters)
> then
> a DC power supply adapter of output voltage between 15V DC and 18V DC
> needs to be procured independently from third party sources. 
> 
> To help you procure the correct power supply adapter, the specification
> of the power adapter is :- 
> 
> 
> Output Voltage Range 
> 
> between 15V to 18V Regulated (preferred 18V max) 
> 
> 
> Current Ratings 
> 
> 1 Ampere (minimum) 
> 
> 
> Type of Plug 
> 
> Barrel Type 
> 
> 
> Plug Polarity 
> 
> outer body = +ve, center = -ve 
> 
> 
> 
> Diameter of plug 
> 
> Inner Diameter of the plug = 2.5mm 
> Outer Diameter of the plug = 5.5mm 
> 
> 
> Length of the plug 
> 
> 10mm or more 
> 
> 
> The supplied standard 12V DC power adapter can power the devices upto
> 160 feet or 50 meters only with standard CAT5 Cables.
> 
>  
> 
> Thanks
> 
>  
> 
> Seeni, SB support
> 
>  
> 
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of shoffman
> Sent: Saturday, June 28, 2003 1:00 AM
> To: '[EMAIL PROTECTED]'
> Subject: [smartBridges] POE Devices
> 
>  
> 
> I know this was talked about but can't find the thread, so asking again
> 
> (sorry for the repeat).
> 
>  
> 
> Anybody find the higher powered power supplies that SB wants us to use 
> 
> for longer POE runs?
> 
>  
> 
> Thanks
> 
>  
> 
> The PART-15.ORG smartBridges Discussion List
> 
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname>
> 
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> 
> Archives: http://archives.part-15.org  
> 
> 

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges 
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org  

Reply via email to