RE: [smartBridges] airBridge indoor min & max operating voltage

[Blaine Fleming]

I'm aware of these numbers, but it didn't answer my question.  What are the 
operating voltage specs for the radio hardware itself?

--Blaine

At 10:40 AM 7/2/2003, you wrote:
Please refer to this link
http://www.smartbridges.com/new/products/ps.php . Normally use of Indoor
airBridge is 12V and is sufficient. If the Ethernet cable length is 160
feet or longer, then use 18V (max).
Alex
sB Tech Support


-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Blaine Fleming
Sent: Thursday, July 03, 2003 12:27 AM
To: '[EMAIL PROTECTED]'
Subject: [smartBridges] airBridge indoor min & max operating voltage
What is the absolute minimum and maximum operating voltage for airBridge

indoor and outdoor units?  I just looked at the site quickly and didn't
find the specs.  Any info would be appreciated.
--Blaine

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in
the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe 
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe 
smartBridges)
Archives: http://archives.part-15.org
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org