well the reason I enabled client to client comm was I thought it would just go to his office instead of send the information all the way back to my office and then back out to him. Am I wrong in thinking this? I was thinking the one radio does this and saves my bandwidth the rest of the way.
----- Original Message ----- From: "Kevin Summers" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, July 09, 2003 11:23 AM Subject: RE: [smartBridges] VPN Question. > > You shouldn't have to enable client-to-client communication on > the AP if they are using real world IPs. The traffic will go to > the MikroTik and then route back to the appropriate IP. (which > just happens to be on the same AP) They may indeed need to be > on different subnets though. I've never tested that. > > Kevin Summers > KISTech Internet Services Inc. > www.kistech.com > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Jerry Carter > Sent: Tuesday, July 08, 2003 9:33 PM > To: [EMAIL PROTECTED] > Subject: [smartBridges] VPN Question. > > > Ok I have to say I have not set one of these up yet. I do have a client that > has there own special network guy telling me that they have to have a real > world IP that is not routed? I run nat on a mikrotik router and route static > Ip's to there internal IP if they need one. The client is connecting to an > appo about 1 mile away from his office that is also connected to the same > appo. They both have 10.0.100.XX IP's(with real world IP's routed to them). > I'm sure the firewalls mike make a difference whether this is possible but > do I need to do anything but make sure that client to client communication > is allowed on the ap? > > Jerry > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
