RE: [smartBridges] BACK-Online URGENT: Head-End APPO not receiving a thing!!

[The Wirefree Network]

I am not using anything in the “repeater mode” . My repeater location consists of 2 radios (one talking to head-end as client, the other transmitting to clients as AP mode).   My repeater never went down either…just the head-end which took EVERYONE down of course.   Sigh….I hope it doesn’t go down again!!   sully     -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bobby Bounds Sent: Thursday, July 17, 2003 1:29 PM To: [EMAIL PROTECTED] Subject: Re: [smartBridges] BACK-Online URGENT: Head-End APPO not receiving a thing!!   Are you aware of the firmware bug when you are using an A/P in "Repeater" mode??? This affected us a couple of months ago when I setup an APPO in "Repeater" mode. As soon as I did this, all the clients associated to the "parent" A/P disassociated!!! Cycling power on the parent causes clients to re-associate but only for a little while. SB say's this was fixed with 1.4.6j. Both the parent unit and the repeater unit need to have this version I believe.   Bobby Bounds Airwave Internet, LLC [EMAIL PROTECTED]     ----- Original Message ----- From: The Wirefree Network To: [EMAIL PROTECTED] Sent: Thursday, July 17, 2003 2:09 PM Subject: [smartBridges] BACK-Online URGENT: Head-End APPO not receiving a thing!!   I cant believe this.  I unplugged it for 15 minutes and plugged it back in, and everyone reassociated immediately.  I had done SEVERAL power resets, etc..etc….but only unplugging it for 15 minutes worked.   SPECIAL NOTE:  It is about 78 degrees here in Monterey, CA.  This SHOULD NOT be a heat problem!!   What the heck!!!!!!!!   sB….will the new firmware fix this??   Sully     -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jeff Gojkovich Sent: Thursday, July 17, 2003 12:18 PM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] URGENT: Head-End APPO not receiving a thing!!   I would unplug it and let it cool off for about 20 min and see if it will come back up then. -- Jeff > > Check any and every connection between the APPO and the antenna. > Look for loose connectors, or water, or a dead amp, etc.. > > If all looks good it's probably the APPO. > > Kevin Summers > KISTech Internet Services Inc. > www.kistech.com > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of The Wirefree Network > Sent: Thursday, July 17, 2003 12:06 PM > To: [EMAIL PROTECTED] > Subject: [smartBridges] URGENT: Head-End APPO not receiving a thing!! > Importance: High > > > My new head-end aPPo just went down. I have had it online for about 5 > days > now with no problems. I am logged into it and looking at the statistics, > it > is receiving ZERO packets. It is constantly transmitting beacons.but is > receiving NOTHING. I have reset it.factory defaulted it.turned off > WEP.turned off authentication.etc.etc.NADA..no received packets at all. > > I have about 22 units that are normally associated to this head-end (one > of > which is a repeater with 20 more clients behind it). Everyone is down!!! > > Has the unit gone to crap or am I forgetting to check something key?? > > Thanks all! > > Sully > > > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org