Seeni The software will be posted by the time I get up (in four hours), right?
That will be July 18 all around the world. Please don't delay this release. Sam On Fri, 18 Jul 2003, sB Tech Support wrote: > Sully. > > Lost association also related the heat issue which is fixed now with new > firmware. The new firmware will be posted very soon. > > > > Seeni, SB support > > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of The Wirefree > Network > Sent: Friday, July 18, 2003 4:10 AM > To: '[EMAIL PROTECTED]' > Subject: [smartBridges] BACK-Online URGENT: Head-End APPO not receiving > a thing!! > > > > I cant believe this. I unplugged it for 15 minutes and plugged it back > in, and everyone reassociated immediately. I had done SEVERAL power > resets, etc..etc..but only unplugging it for 15 minutes worked. > > > > SPECIAL NOTE: It is about 78 degrees here in Monterey, CA. This SHOULD > NOT be a heat problem!! > > > > What the heck!!!!!!!! > > > > sB..will the new firmware fix this?? > > > > Sully > > > > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Jeff Gojkovich > Sent: Thursday, July 17, 2003 12:18 PM > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] URGENT: Head-End APPO not receiving a > thing!! > > > > I would unplug it and let it cool off for about 20 min and see if it > will come back up then. > > -- > Jeff > > > > > Check any and every connection between the APPO and the antenna. > > Look for loose connectors, or water, or a dead amp, etc.. > > > > If all looks good it's probably the APPO. > > > > Kevin Summers > > KISTech Internet Services Inc. > > www.kistech.com > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] Behalf Of The Wirefree > Network > > Sent: Thursday, July 17, 2003 12:06 PM > > To: [EMAIL PROTECTED] > > Subject: [smartBridges] URGENT: Head-End APPO not receiving a thing!! > > Importance: High > > > > > > My new head-end aPPo just went down. I have had it online for about 5 > > days > > now with no problems. I am logged into it and looking at the > statistics, > > it > > is receiving ZERO packets. It is constantly transmitting beacons.but > is > > receiving NOTHING. I have reset it.factory defaulted it.turned off > > WEP.turned off authentication.etc.etc.NADA..no received packets at > all. > > > > I have about 22 units that are normally associated to this head-end > (one > > of > > which is a repeater with 20 more clients behind it). Everyone is > down!!! > > > > Has the unit gone to crap or am I forgetting to check something key?? > > > > Thanks all! > > > > Sully > > > > > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > smartBridges) > > Archives: http://archives.part-15.org > > > The PART-15.ORG smartBridges Discussion List To Join: > mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges To > Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
