Title: RE: [smartBridges] Multipath Solutions

Pump the antenna up to 12-15db or add a good amp change your polarity to horizontal because it works better over water and is a proven solution to these problems.

Chris

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Friday, July 18, 2003 1:17 AM
To: [EMAIL PROTECTED]

I have a number of shots going over water. 5ghz and 2.4ghz. Horizontal
Polarity is your friend in these cases. Also, why are you using such a low
gain antenna?

Jeremy

On Fri, 18 Jul 2003, Dave Covert wrote:

> RE: [smartBridges] New FirmwareI am trying to install an aBO on ch11 with a
> 9db Maxrad panel in a marina. The tower is about 1.1km away with loads of
> sailboat masts, apartment buildings and one other WISP on ch01 in the way...
> no where near clean line-of-sight, but I am still getting a RSSI of 77% and
> a LQ of 90%. Not bad...
>
> The thing that is bad however is the thru-put... only about 50% of the pings
> make it there and back. Almost none of the packets longer than a ping make
> it...
>
> I am guessing I am in multipath hell... anyone know of proven techniques to
> moderate the effects of multipath?
>
> Dave
> Home Wireless Company
>

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org 

Reply via email to