It was the answer here too... I put up a 18db panel and >boom<... 100% RSSI, 100% LQ and 2.5 mbps on QCheck. Amazing. I gonna have to do that some more!
Dave -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of [EMAIL PROTECTED] Sent: Friday, July 18, 2003 12:23 AM To: '[EMAIL PROTECTED]' Subject: RE: [smartBridges] Multipath Solutions I have found amps to usually compound the problem over water. Higher gain antennas are usually the answer. On Fri, 18 Jul 2003, phantam wrote: > Pump the antenna up to 12-15db or add a good amp change your polarity to > horizontal because it works better over water and is a proven solution to > these problems. > > Chris > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Sent: Friday, July 18, 2003 1:17 AM > To: [EMAIL PROTECTED] > > I have a number of shots going over water. 5ghz and 2.4ghz. Horizontal > Polarity is your friend in these cases. Also, why are you using such a low > gain antenna? > > Jeremy > > On Fri, 18 Jul 2003, Dave Covert wrote: > > > RE: [smartBridges] New FirmwareI am trying to install an aBO on ch11 with > a > > 9db Maxrad panel in a marina. The tower is about 1.1km away with loads of > > sailboat masts, apartment buildings and one other WISP on ch01 in the > way... > > no where near clean line-of-sight, but I am still getting a RSSI of 77% > and > > a LQ of 90%. Not bad... > > > > The thing that is bad however is the thru-put... only about 50% of the > pings > > make it there and back. Almost none of the packets longer than a ping make > > it... > > > > I am guessing I am in multipath hell... anyone know of proven techniques > to > > moderate the effects of multipath? > > > > Dave > > Home Wireless Company > > > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
