Seeni I need APPO software. How stable is your beta code?
Also, I have two APPOs that I'm putting on a tower that refuse to associate at all (even when first powered on) with one another. In fact, they cannot SEE each other. I tried one in CB mode and the other in AP mode. This didn't work, so I reversed them. They still couldn't see each other. They are only about 4 miles apart. Could this be related ot the bug that the firmware is supposed to fix, or do I have a bad radio? Thanks Sam On Fri, 18 Jul 2003, Vasu (sB Tech Team) wrote: > Hi All, > > The airBridge firmware is available for download at the following link > http://www.smartbridges.com/new/support/beta.php. Please refer to the > document on how to do a Firmware Upgrade on the airBridge. The same document > is attached for your reference too. The above link provides only the > firmware Wireless Bridge (Ver. 0.01.06).rom and does not include the > complete software package. Please use existing latest simpleMonitor software > version (1.51) > > The firmware for airPointPRO will be released shortly, sorry for the delay. > As we release the firmware for the airPointPRO we will send an email again > on PART15. Please follow the link as mentioned above. > > Email <mailto:[EMAIL PROTECTED]> [EMAIL PROTECTED] with your > feedback and any issues you have so that we can attend to them on an > individual basis. > > With Best Regards, > > Vasu > (sB Support Team) > > > > The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
