OK, Here it is again. I upgraded 3 indoor units that were not in the bad chip batch but were showing signal loss, probably from interference. These 3 are working great and the upgrade is OK. I have one ABO that was confirmed as in the bad batch and was showing symptoms. I gave this unit 15 min of off time last week and it has been working OK since. I did the upgrade, got confirmation of download and 15 minutes later it was gone and has not come up. The new software did not seem to fix this one. I will post later if off time brings this one back up as no one is home at the cust. site.
Nish Park wrote: > You guys are running way ahead of us. The upgrade was tested only on the new > devices for the specific purpose of dis-association. > > So now you have done it, please share the results with us. Thanks. > > Nish > > > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > On Behalf Of Jeremy Oswalt > Sent: Saturday, July 19, 2003 10:02 AM > To: '[EMAIL PROTECTED]' > Subject: RE: [smartBridges] Firmware release for airBridge series > > Oops . . . I upgraded all 18 of my clients. > > _____ > > Jeremy > _____ > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > On Behalf Of sB Tech Support > Sent: Friday, July 18, 2003 4:07 PM > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] Firmware release for airBridge series > > Here are our STRONG recommendations. > 1. Use these Firmware images ONLY if you are experiencing problems > described in the customer advisory, AND you have urgent need to address the > issue. > 2. DO NOT use the Firmware on a wide spread basis or in production > environment. > 3. Be conservative and be prudent. If you can wait for a few more days, > please do so. It may save you some efforts. > 4. This Firmware images do not include any new functionality. So > upgrading the unaffected devices is not useful. > Seeni, SB support > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > On Behalf Of Pascal Losier > Sent: Saturday, July 19, 2003 2:09 AM > To: '[EMAIL PROTECTED]' > Subject: RE: [smartBridges] Firmware release for airBridge series > > Is this firmware OK for all Airbridge devices or only for those having the > symptoms ???? > > ------------------------------------------------------------------------ > Name: winmail.dat > winmail.dat Type: application/ms-tnef > Encoding: base64 The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
