Blazen no no I doubt chris meant anything agressive by it, feel free to ask personally I knew 0 about snmp before starting on this list but thanks to some general info from sb support I got the necessary info from the airbridges.
-----Original Message-----
From: Blazen Wireless [mailto:[EMAIL PROTECTED]]
Sent: Sunday, July 20, 2003 3:39 PM
To: [EMAIL PROTECTED]
I was just going by what the tutorial stated on the smartbridges website so
don't blame me I was just following directions..
Dang last time I ask for a little help not all of us are such brains as you
seem to be.
----- Original Message -----
From: "Lancaster Networks" <[EMAIL PROTECTED]>
To: "Blazen Wireless" <[EMAIL PROTECTED]>
Sent: Sunday, July 20, 2003 12:27 PM
Subject: Re[2]: [smartBridges] trying to get MRTG to work on my desktop
machine
Those are some pretty basic SNMP commands, you might want to read a
tutorial online about SNMP, I find it hard to beleive any wISP doesn't
know how to use SNMP
Sunday, July 20, 2003, 2:27:01 PM, you wrote:
BW> Return-Path: <>
BW> Received: from [66.150.163.162] (HELO m5)
BW> by spamarrest.com (CommuniGate Pro SMTP 4.0.3)
BW> with ESMTP id 10298733 for cbunting; Sun, 20 Jul 2003 11:34:22 -0700
BW> Received: from part-15.org ([198.63.203.3])
BW> by mail.fission2.com (Merak 5.9.4) with SMTP id CPA74271
BW> for <[EMAIL PROTECTED]>; Sun, 20 Jul 2003
14:27:47 -0400
BW> Received: from dns2.blazenwireless.net [66.80.227.3] by pdqlink.com with
ESMTP
BW> (SMTPD32-4.07) id A0C0344012C; Sun, 20 Jul 2003 13:34:40 CDT
BW> Received: from 733MHZ (unknown [66.80.227.26])
BW> by dns2.blazenwireless.net (Postfix) with SMTP id 64F6866DDA
BW> for <[EMAIL PROTECTED]>; Sun, 20 Jul 2003 11:26:44 -0700
(PDT)
BW> Message-ID: <[EMAIL PROTECTED]>
BW> From: "Blazen Wireless" <[EMAIL PROTECTED]>
BW> To: <[EMAIL PROTECTED]>
BW> References: <[EMAIL PROTECTED]>
BW> Date: Sun, 20 Jul 2003 11:27:01 -0700
BW> MIME-Version: 1.0
BW> Content-Type: multipart/alternative;
BW> boundary="----=_NextPart_000_005A_01C34EB1.D6FABB80"
BW> X-Priority: 3
BW> X-MSMail-Priority: Normal
BW> X-Mailer: Microsoft Outlook Express 6.00.2800.1158
BW> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165
BW> Subject: Re: [smartBridges] trying to get MRTG to work on my desktop
machine
BW> Precedence: bulk
BW> Sender: [EMAIL PROTECTED]
BW> Reply-To: [EMAIL PROTECTED]
BW> MessageI went into the services settings and they are both there one was
not started so I started it and it does the same thing? I don't understand
this command? snmpwalk hostname community what
BW> do I put for the hostname and community?
BW> ----- Original Message -----
BW> From: rich
BW> To: [EMAIL PROTECTED]
BW> Sent: Sunday, July 20, 2003 11:25 AM
BW> Subject: RE: [smartBridges] trying to get MRTG to work on my desktop
machine
BW> ideally you'd be running this from a dos prompt if it's windows, unix
a little more versitile when it comes to a monitoring machine in my
opinion.. i not totally familiar with alot of the
BW> windows stuff being all unix here!
BW> -----Original Message-----
BW> From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf Of Blazen Wireless
BW> Sent: Sunday, July 20, 2003 2:20 PM
BW> To: [EMAIL PROTECTED]
BW> Subject: Re: [smartBridges] trying to get MRTG to work on my desktop
machine
BW> Where do I go to see if that file or app is loaded on my PC? SEE
below
BW> ----- Original Message -----
BW> From: rich
BW> To: [EMAIL PROTECTED]
BW> Sent: Sunday, July 20, 2003 11:05 AM
BW> Subject: RE: [smartBridges] trying to get MRTG to work on my
desktop machine
BW> try doing:
BW> snmpwalk hostname community DO I type this in a command prompt
within the mrtg folder like the other commands??
BW> see if it outputs something..
BW> also, did you install the snmpd service on the windows box?
BW> snmpwalk should be there, i know on unix installs it is
BW> -----Original Message-----
BW> From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf Of Blazen Wireless
BW> Sent: Sunday, July 20, 2003 12:22 PM
BW> To: [EMAIL PROTECTED]
BW> Subject: [smartBridges] trying to get MRTG to work on my desktop
machine
BW> Importance: High
BW> I loaded per the instructions and this is what I get when trying
to run from the command prompt per the instructions, am I doing something
wrong??
BW> Win 2000 machine
BW> 2 nic cards one public IP one private for simple monitor etc.
BW> No web server software on this machine just the basic windows
install do I need IIS install too?
BW> C:\mrtg-2.10.0pre5\bin>perl cfgmaker [EMAIL PROTECTED] --global
"WorkDir: c:\www\mrtg" --output mrtg.cfg
BW> --base: Get Device Info on [EMAIL PROTECTED]:
BW> SNMP Error:
BW> no response received
BW> SNMPv1_Session (remote host: "10.0.0.12" [10.0.0.12].161)
BW> community: "public"
BW> request ID: -959681549
BW> PDU bufsize: 8000 bytes
BW> timeout: 2s
BW> retries: 5
BW> backoff: 1)
BW> SNMPWALK Problem for 1.3.6.1.2.1.1 on
[EMAIL PROTECTED]::::::v4only
BW> WARNING: Skipping [EMAIL PROTECTED]: as no info could be
retreived
BW> --base: Writing mrtg.cfg
BW> Thanks
BW> Martin Moreno
BW> Blazen Wireless
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org
