Okay, found some old posts and did power cycle...actually I did a couple
of 'em and finally it associated with the APPO...but...I couldn't even
ping the APPO or anything else on the main network for that
matter...however I could ping the ABTotal....then after about 10-15
minutes, I lost association again. Now I'm back to the first error
message saying "Unable to associate..Please check authentication and
WEP".



-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Laurence Laforga
Sent: Thursday, July 24, 2003 10:28 PM
To: [EMAIL PROTECTED]
Subject: [smartBridges] More AB Total issues

I've got another AB Total that doesn't want to associate with our APPO.
It's got the latest firmware and it keeps telling me "Unable to
associate....Please check Authorization and WEP" The APPO is set for MAC
authentication and our AB Indoor associates fine with the latest
firmware.

Does anyone have any suggestions? When searching for APs, it shows our
APPO with link qual of 85%.

Thanks!


The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org  


The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges 
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org  

Reply via email to