I do have a similar problem going on...but it is not on ALL units.  I
have attributed my problem to the firmware upgrade on my aPPo.

Are your burned in passwords "difficult" (i.e. [EMAIL PROTECTED])??

Sully

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Martin Moreno
Sent: Monday, August 04, 2003 8:35 PM
To: [EMAIL PROTECTED]
Subject: [smartBridges] CANT LOG INTO ANY RADIOS AFTER UPDATING SETTINGS
WITH SIMPLE NMS

Asking once again has anyone done an update to all radios with simple
nms and 
not be able to log back into any of the radios with the password that
was set 
for each one? All radios show up and I can click on them and see they
are 
running and I can reboot all them at once with simple nms with the
password I 
set but I can no longer log in to manage them I keep getting the check
password 
screen when trying to log in. I tried the "public" password and that
will not 
work either. 

I need to adjust the settings ASAP and I dont have the time to go to 50
houses 
to trouble shoot any ideas on what the cause and what the remedy is to
get back 
into the radios??

Thanks 

-M 
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org  

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges 
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org  

Reply via email to