Wouldn't it be possible for a limited release under lock and key of an over the air simpledeploy so that those of us that haven't gotten everything up to date can do so without thousands of $ in truck rolls :(
Chris
-----Original Message-----
From: The Wirefree Network [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, August 05, 2003 1:15 AM
To: [EMAIL PROTECTED]
I wish I could do that as well!!! However, it is a protective measure
by sB to not allow simpleDeploy to be used wirelessly. Only on the
wired side.
Sully
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf Of Martin Moreno
Sent: Monday, August 04, 2003 9:53 PM
To: [EMAIL PROTECTED]
Subject: RE: [smartBridges] CANT LOG INTO ANY RADIOS AFTER UPDATING
SETTINGS WITH SIMPLE NMS
Thanks Sully but I wont have to read my other posts VERY strange
behavier. Can
you run simple deply remotely over the air?? that would be nice!
Quoting The Wirefree Network <[EMAIL PROTECTED]>:
> If you used simpleDeploy prior to deployment, then you can just ask
all
> your users to hold the pin hole reset in for 30 secs.
>
> If you didn't run simpleDeploy prior to deployment, then take this
> opportunity to do so on your upcoming marathon truck roll.
>
> Sully
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]] On Behalf Of Martin Moreno
> Sent: Monday, August 04, 2003 8:56 PM
> To: [EMAIL PROTECTED]
> Subject: RE: [smartBridges] CANT LOG INTO ANY RADIOS AFTER UPDATING
> SETTINGS WITH SIMPLE NMS
>
> Yes that will work I am sure, but all thats going to do for me is
> require a
> truck roll to over 50 users and I will have to reconfigure the radios
> again.
> Thats what I did not want to have to do
>
>
> Quoting The Wirefree Network <[EMAIL PROTECTED]>:
>
> > I have been able to regain my remote management capability (for
some)
> by
> > having the user do the "restore to factory default" (with pin hole
on
> > POE).
> >
> > Sully
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED]] On Behalf Of Martin Moreno
> > Sent: Monday, August 04, 2003 8:44 PM
> > To: [EMAIL PROTECTED]
> > Subject: Re: [smartBridges] CANT LOG INTO ANY RADIOS AFTER UPDATING
> > SETTINGS WITH SIMPLE NMS
> >
> > I did not upgrade them I just changed some settings. That's it
already
> > did the
> > upgrade last week to the new firmware which went well. The problem I
> am
> > having
> > is I used simple NMS to change RTC CTS settings on all the radios
> > instead of
> > doing each one at a time. I did this like 5-6 times before and this
> last
> > time
> > BAM no more being able to log in with my password or any other
> password
> > which
> > has really screwed me as the settings I changed to were worse and I
> have
> > people
> > calling me all day long. ARGHHH so my question was do I have to do a
> > hard rest
> > to default on each unit which would take all damn week which I have
NO
> > time
> > for. I hate having these darn glitches every so often and when they
> > happen they
> > really hurt.
> >
> >
> > . Quoting [EMAIL PROTECTED]:
> >
> > > This won't help you now, but ALWAYS ALWAYS ALWAYS roll out
upgrades
> to
> > two
> > > or three units first. Regardless if you are managing servers,
> routers,
> > > wireless bridges, whatever.
> > >
> > > On Mon, 4 Aug 2003, Martin Moreno wrote:
> > >
> > > > Asking once again has anyone done an update to all radios with
> > simple nms
> > > and
> > > > not be able to log back into any of the radios with the password
> > that was
> > > set
> > > > for each one? All radios show up and I can click on them and see
> > they are
> > > > running and I can reboot all them at once with simple nms with
the
> > password
> > > I
> > > > set but I can no longer log in to manage them I keep getting the
> > check
> > > password
> > > > screen when trying to log in. I tried the "public" password and
> that
> > will
> > > not
> > > > work either.
> > > >
> > > > I need to adjust the settings ASAP and I dont have the time to
go
> to
> > 50
> > > houses
> > > > to trouble shoot any ideas on what the cause and what the remedy
> is
> > to get
> > > back
> > > > into the radios??
> > > >
> > > > Thanks
> > > >
> > > > -M
> > > > The PART-15.ORG smartBridges Discussion List
> > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> > > smartBridges <yournickname>
> > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type
> unsubscribe
> > > smartBridges)
> > > > Archives: http://archives.part-15.org
> > > >
> > >
> > > The PART-15.ORG smartBridges Discussion List
> > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> > smartBridges
> > > <yournickname>
> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type
unsubscribe
> > > smartBridges)
> > > Archives: http://archives.part-15.org
> > >
> >
> >
> > Martin Moreno
> > Blazen Wireless
> > 909-907-4106
> > www.blazenwireless.com
> > The PART-15.ORG smartBridges Discussion List
> > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> > smartBridges <yournickname>
> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> > smartBridges)
> > Archives: http://archives.part-15.org
> >
> > The PART-15.ORG smartBridges Discussion List
> > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges
> > <yournickname>
> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> > smartBridges)
> > Archives: http://archives.part-15.org
> >
>
>
> Martin Moreno
> Blazen Wireless
> 909-907-4106
> www.blazenwireless.com
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://archives.part-15.org
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges
> <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://archives.part-15.org
>
Martin Moreno
Blazen Wireless
909-907-4106
www.blazenwireless.com
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org
