They are more then welcome here.. Within very short distance I have at least 3 other WISPs that I could have them visit as well. At least 2 out of these 3 are either displeased or very displeased with sB at this point.. These USED to be sB ONLY people and use to praise the product. It's time for sB to wake up smell the coffee and fix their issues. If you ask me if this means scrapping an entire line of inventory of equipment they built so be it because if they keep shipping out bad equipment then they will not have anyone to ship soon. They need to fix their problems and bring back the great product they had 9 months ago. But for many it's already to late I know more then a few that will never use sB again.
Best regards, Eje Gustafsson mailto:[EMAIL PROTECTED] The Family Entertainment Network http://www.fament.com Phone : 620-231-7777 Fax : 620-231-4066 - Your Full Time Professionals - MikroTik OEM dealer - online store http://www.fament.net/ -- CC> I think it's time for the boys at SB to start taking trips to the US to eje CC> and the others to see exactly whats going on IN THE FIELD. But that's just CC> my view... CC> -----Original Message----- CC> From: Shawn Mitchell [mailto:[EMAIL PROTECTED] CC> Sent: Sunday, August 17, 2003 1:50 AM CC> To: [EMAIL PROTECTED] CC> very good line.. very true too... Plain tickets to singapore are CC> expensive... I've already looked up the prices.. CC> -----Original Message----- CC> From: [EMAIL PROTECTED] CC> [mailto:[EMAIL PROTECTED] Behalf Of beckman CC> Sent: Saturday, August 16, 2003 17:24 CC> To: [EMAIL PROTECTED] CC> Subject: RE: [smartBridges] 2 New aPPo's DONT WORK CC> This is why SB has no factory presence in USA.... They might get lynched by CC> us who are frustrated with them... :) CC> Donald Beckman CC> Fort Worth, Texas CC> -----Original Message----- CC> From: [EMAIL PROTECTED] CC> [mailto:[EMAIL PROTECTED] Behalf Of The Wirefree Network CC> Sent: Saturday, August 16, 2003 5:00 PM CC> To: [EMAIL PROTECTED] CC> Subject: RE: [smartBridges] 2 New aPPo's DONT WORK CC> Thanks for sticking up for me and all the rest of us frustrated LOYAL CC> customers. Being that I have been using sB equipment SOLELY for 8 months, I CC> do know how to make this stuff work...which sad to say is NOT plug and play. CC> But...once you get to know the little tweaks, it works DAMN well!!!!! CC> UNTIL....BIG UNTIL...this latest batch of screwed up equipment. This stuff CC> just does all kinds of weird stuff. And...I found 2 more bad POE units CC> today as well. I believe it is loose connectivity in the power cord at the CC> little chrome plug again....wiggle it one way and it works....wiggle it the CC> other way and dead as a doornail. CC> Anyway....I am very frustrated...and very tired. My most loyal of customers CC> are now questioning my service. That is a stab to my heart! I live and CC> breath this stuff and the problems do NOT LIE WITH MY ABILITIES!! CC> I wish sB could just go back to their old manufacturer and old chip CC> set...and give me some good stuff again!! CC> Well...back to my lab. CC> Sully CC> -----Original Message----- CC> From: [EMAIL PROTECTED] CC> [mailto:[EMAIL PROTECTED] Behalf Of Blazen Wireless CC> Sent: Saturday, August 16, 2003 8:14 AM CC> To: [EMAIL PROTECTED] CC> Subject: Re: [smartBridges] 2 New aPPo's DONT WORK CC> I will say it again. Having us (sully) test stuff for SB is a waste. We can CC> only do so much we are not engineers. What you do in the lab is MUCH MUCH CC> MUCH different in the real world. SB you guys are in a clean environment and CC> in perfect conditions, yes I am sure you can duplicate some scenarios but CC> not all. Maybe it is time to send someone on a 2 week road trip to see these CC> units and how they do or do not perform as designed IN the field so you can CC> see first hand our findings and frustrations and give is input as well as CC> give yourselves input on what is going on. You ALWAYS and I do mean always CC> find it to be a fault with the installation. Look at this problem for CC> example he has exhausted his resources trying to figure it out, he explained CC> twice or maybe three times now the original APPO works well just cuts out CC> and he puts the NEW one up and it does not work even 1/8 as long as his CC> original unit. CC> It seems you need some real help in the trouble shooting skill area. I was a CC> tech support manager for over 8 years and that was my job to troubleshoot CC> things no offense Engineers are NOT always good trouble shooters unless they CC> can put test equipment on the device and have HARD evidence to explain what CC> is going on. There is no way in hell you can tell me you can try and figure CC> all these problems out without sending one of your engineers or techs out to CC> see what's going on. You have wasted many man hours of your own time as well CC> as ours tying to fix problems you don't seem to think it is related to the CC> equipment?? CC> Once you send someone out and they are either stumped or maybe they will see CC> something and say OHH HEY that should not be like that we need to change CC> this cap or resistor to a better value etc then your only wasting man-hours CC> for all. CC> SEND SOMEONE OUT of all the time and effort you put into all this and still CC> not got much of anywhere (yes the new firmware did help but still others are CC> having problems) you could have sent your whole team roundtrip to Orlando CC> Disney world for a week.. CC> Do yourself and us a favor send someone out in the field, if it were my CC> company I would unless there is something you already know and are afraid to CC> confirm by coming out in the field. Our jobs / lives are on hold waiting for CC> your answers to these problems and for those of us that have stuck with you CC> thick and thin you need to at least do us this one favor... CC> If its not an SB problem then sure we are at fault but there has to be some CC> logical answer as to why these units have all of a sudden been a real pain CC> in the ass! CC> Martin CC> ----- Original Message ----- CC> From: "The Wirefree Network" <[EMAIL PROTECTED]> CC> To: <[EMAIL PROTECTED]> CC> Sent: Saturday, August 16, 2003 7:55 AM CC> Subject: RE: [smartBridges] 2 New aPPo's DONT WORK CC> Same location...different outlet. If it were a power problem (which I CC> suspected as well), then why would it work with the aPPo on the roof right CC> now, but not work with the 2 new aPPo's?? CC> I did swap the POE unit twice to confirm. CC> Sully CC> -----Original Message----- CC> From: [EMAIL PROTECTED] CC> [mailto:[EMAIL PROTECTED] Behalf Of Nish Park CC> Sent: Saturday, August 16, 2003 6:17 AM CC> To: [EMAIL PROTECTED] CC> Subject: RE: [smartBridges] 2 New aPPo's DONT WORK CC> Yes I can confirm that keeping the antenna port open will not harm the CC> radio. CC> Is there a difference in the quality of AC power at these locations? CC> Nish CC> -----Original Message----- CC> From: [EMAIL PROTECTED] CC> [mailto:[EMAIL PROTECTED] On Behalf Of Stuart Pierce CC> Sent: Saturday, August 16, 2003 8:49 PM CC> To: '[EMAIL PROTECTED]' CC> Subject: RE: [smartBridges] 2 New aPPo's DONT WORK CC> Why are they working in the garage ? To many variables are still there ! CC> Use the same length of 10baseT cable, same essid, same wep, same CC> channel. If you can't do that in your garage take it someplace else. CC> What kind of clients are they ? Are they all SB's or a mixture ? CC> Is anyone sure that not connecting an antenna will not do something bad CC> to the radio ? CC> ---------- Original Message ---------------------------------- CC> From: "The Wirefree Network" <[EMAIL PROTECTED]> CC> Reply-To: [EMAIL PROTECTED] CC> Date: Sat, 16 Aug 2003 00:58:20 -0700 >>I agree that it sounds coincidental...but why did it happen?!? >> >>I changed the antennas and power supplies 2 times. As a matter of CC> fact, >>I had to go back to my original power supply because one of the power >>supplies that came with the aPPo had a faulty cable (that was an easy >>find during initial setup). >> >>I am only running 45 ft of cable. >> >>I never give up...so...here I am in my garage at 1:00am with a test >>setup. I have one of the (suspected) bad aPPo's running now for about CC> 3 >>hours with no problems. However, I only have 1 client connected to >>it...and that is me. >> >>Differences with this garage setup over the head-end: >>1. Only 1 client online >>2. Different SSID (by one letter) >>3. Different WEP (by a few letters) >>4. Different channel (freq) >>5. No antenna connected to the aPPo right now >>6. Different CAT5 feeding the signal to it (only 5 ft run now) >> >>All other factors are the same: >>1. Internal MAC authentication >>2. Power Supply >>3. etc..... >> >>I have NOOOOO idea why 2 units did not work on the roof?!?!? >> >>The Ethernet light would come on...the TXRX light would start >>flashing...and all was well for 5-10 minutes. Then DEAD! I put the >>original (going bad) aPPo back up...and it works fine. I put one of CC> the >>(suspected) bad units back up...and 5 minutes...dead. I put the >>original one back up...and it is working fine. >> >>Looks like bad units to me?!>! But...why are they working here in the >>garage?? Are these units SUPER sensitive to power...cause I am only >>running 5 ft of CAT 5 in here...as opposed to the 45 ft on the >>roof...with same power supply. >> >>Sully >> >>-----Original Message----- >>From: [EMAIL PROTECTED] >>[mailto:[EMAIL PROTECTED] On Behalf Of Nish Park >>Sent: Saturday, August 16, 2003 12:17 AM >>To: [EMAIL PROTECTED] >>Subject: RE: [smartBridges] 2 New aPPo's DONT WORK >> >>What is the voltage of the power adapter you are using? >> >>2 units failing with the exact same symptoms is a little more than >>co-incidence can explain. Perhaps it points to something else. >> >>Nish >> >> >>-----Original Message----- >>From: The Wirefree Network [mailto:[EMAIL PROTECTED] >>Sent: Saturday, August 16, 2003 12:32 PM >>To: 'The Wirefree Network'; '[EMAIL PROTECTED]' >>Cc: '[EMAIL PROTECTED]'; '[EMAIL PROTECTED]'; sB Tech >>Support >>Subject: RE: 2 New aPPo's DONT WORK >> >>Oh...forgot one thing. During the 5 minute period of the aPPo's >>working...I was watching the statistics and noticed that the unit's CC> kept >>rebooting. The statistics would keep going back to zero. Then it just >>died. >> >>What the heck is going on?!?!? >> >>Sully >> >>-----Original Message----- >>From: The Wirefree Network [mailto:[EMAIL PROTECTED] >>Sent: Friday, August 15, 2003 9:26 PM >>To: '[EMAIL PROTECTED]' >>Cc: '[EMAIL PROTECTED]'; '[EMAIL PROTECTED]'; >>'[EMAIL PROTECTED]' >>Subject: 2 New aPPo's DONT WORK >>Importance: High >> >>I received an aPPo from Electro-Comm that I PAID EXTRA for to have it >>overnighted to me so that I could replace a faulty aPPo (firmware >>issue). >> >>First thing I did was upgrade the firmware like the STICKER says on the >>box. Then burned in my settings with simpleDeploy. All went well. >> >>I replaced it and it worked like a champ--all clients reassociated! >>Woohooo!! Five minutes later clients started dropping off and the >>Ethernet side died! I did a power reset and it came back up but only a >>few clients associated back up with it. So...I waited a couple minutes >>and the Ethernet side died again. >> >>I reflashed it...I lowered the firmware...I reflashed it...I upgraded >>the firmware...I replaced the powershot twice...I did EVERYTHING! The >>Ethernet side would keep crashing. In case it matters to anyone...it >>was only 70 degrees here today. >> >>So...I put my old unit back up (after only 3 hours of MY LABOR WAISTED) >>and it worked fine. My old unit periodically crashes..and that is why CC> I >>am RMAing it. >> >>Yesterday...I received my stock (and spares) from Electro-Comm. I >>started the process ALL OVER AGAIN...with the exact same results (3 CC> more >>hours waisted). The Ethernet side DIED after 5 minutes. >> >>I am once again back on my old aPPo...I have a bunch of pissed off >>customers....and I am VERY pissed myself. I am soooo sick of spending >>hours upon hours replacing bad equipment. >> >>sB...can you please send me 2 aPPo's from Singapore...that you have >>actually verified work for longer than 5 minutes?!?! >> >>Sully >> >> >>The PART-15.ORG smartBridges Discussion List >>To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe >>smartBridges <yournickname> >>To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe >>smartBridges) >>Archives: http://archives.part-15.org >> >>The PART-15.ORG smartBridges Discussion List >>To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe CC> smartBridges <yournickname> >>To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe CC> smartBridges) >>Archives: http://archives.part-15.org >>--- >>[This E-mail scanned for viruses by Declude Virus By Avolve.net] >> >> CC> --- CC> [This E-mail scanned for viruses by Declude Virus By Avolve.net] CC> The PART-15.ORG smartBridges Discussion List CC> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe CC> smartBridges <yournickname> CC> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe CC> smartBridges) CC> Archives: http://archives.part-15.org CC> The PART-15.ORG smartBridges Discussion List CC> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe CC> smartBridges <yournickname> CC> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe CC> smartBridges) CC> Archives: http://archives.part-15.org CC> The PART-15.ORG smartBridges Discussion List CC> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe CC> smartBridges <yournickname> CC> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe CC> smartBridges) CC> Archives: http://archives.part-15.org CC> The PART-15.ORG smartBridges Discussion List CC> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe CC> smartBridges <yournickname> CC> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe CC> smartBridges) CC> Archives: http://archives.part-15.org CC> The PART-15.ORG smartBridges Discussion List CC> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe CC> smartBridges <yournickname> CC> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe CC> smartBridges) CC> Archives: http://archives.part-15.org CC> The PART-15.ORG smartBridges Discussion List CC> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe CC> smartBridges <yournickname> CC> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe CC> smartBridges) CC> Archives: http://archives.part-15.org CC> The PART-15.ORG smartBridges Discussion List CC> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe CC> smartBridges <yournickname> CC> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe CC> smartBridges) CC> Archives: http://archives.part-15.org -- [This E-mail scanned for viruses by Declude Virus] The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
