You need to use the packet captures to investigate the nature of the fault. You are using very inaccurate tools to try to decipher which equipment in your network could be having problems. And believe me, all the issues that get reported to this forum and our support desk are not related to our radios.
You may have a bad aPPO. I am not denying that. But the information that you presented does not mean anything. The RSSI and LQ display graph gets updated only every few seconds, which is like an eternity to observe the packet loss related issues. Nish -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Shawn Mitchell Sent: Saturday, August 23, 2003 11:24 AM To: 'smartBridges' Subject: [smartBridges] Not dis-associations, but just no data traffic going on... http://www.iodamedia.net/sb/ Screen shots.. image sizes are small.. It's about a 30 min timeframe from when screen shots start getting taken, until they finish. I think a lot of you will start to see the same issue you have. btw.. I had an old (one from my original purchase of AP's last year) that suddenly you couldn't associate to it, nor could you pass traffic. When I sniffed the channel it's on, I could see data being transmitted from it though. anyway, I downgraded it today to March's FW version. And guess what, I now have 3 customers flying along just fine on it. You (sb) have a bug in your firmware... Look through all the changes made to that version to cause this please! As always, comments are more than welcome... The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
