Nish lets get back to basics rev 1 stuff back a few months before the timign issues (HEAT and chip) worked great NOTHING has changed in most these peoples setup other then they put in a NEW APPO or ABO and it does not work??? the firmware was a bandaid to some chip issues. Now honeslty with a straight face your going to tell us that its something on our end and NOT the radio? Once again I challenge you or your partners to come see what we are talking about. IF you dont have the balls to do it then screw you and the company and we will take our business elswhere and will post the results on this forum and others. Believe me 1 or two upset customers is going to ruin your business.
You gys seem to think your shit does not stink I am tired of it I gave you answers to questions and you guys tend NOT to believe what we tell you. You haev no business being in this business if you cant take the info we provide and look into the problem further. I am sorry for sounding harsh but I am F**ING PISSED and tired of making house calls for dissassociations or units bad out of the box like others are describing. Once again pull your heads out of your asses and listen up THE END OF THE ASSEMBLY line is NOT the be all end all for proving yoru product works! Taek the SH*T in the field here in the US and SHOW us what and how we are doing it wrong if you think we are in fact incorrect We have asked kindly for your help now countless times and all you ever reply with is Crimp a new connector on, its a bad setup we have, you have to much gain, or this or that blah blah blah. If I heard it once I have heard it a hundred times now and if you told it to me here live I would have to really hold back to not dot yoru eyes! GET REAL AND HELP US!!!!!! DAMN IT JIM! Quoting Nish Park <[EMAIL PROTECTED]>: > You need to use the packet captures to investigate the nature of the > fault. You are using very inaccurate tools to try to decipher which > equipment in your network could be having problems. And believe me, all > the issues that get reported to this forum and our support desk are not > related to our radios. > > You may have a bad aPPO. I am not denying that. But the information that > you presented does not mean anything. The RSSI and LQ display graph gets > updated only every few seconds, which is like an eternity to observe the > packet loss related issues. > > Nish > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Shawn Mitchell > Sent: Saturday, August 23, 2003 11:24 AM > To: 'smartBridges' > Subject: [smartBridges] Not dis-associations, but just no data traffic > going on... > > http://www.iodamedia.net/sb/ > > Screen shots.. image sizes are small.. It's about a 30 min timeframe > from > when screen shots start getting taken, until they finish. I think a lot > of > you will start to see the same issue you have. > > btw.. I had an old (one from my original purchase of AP's last year) > that > suddenly you couldn't associate to it, nor could you pass traffic. When > I > sniffed the channel it's on, I could see data being transmitted from it > though. anyway, I downgraded it today to March's FW version. And > guess > what, I now have 3 customers flying along just fine on it. You (sb) > have a > bug in your firmware... Look through all the changes made to that > version to > cause this please! > > As always, comments are more than welcome... > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges > <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > Martin Moreno Blazen Wireless 909-907-4106 www.blazenwireless.com The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
