|
The
problem we have seen is that the AB is associated, we can log in remotely but
the client cannot pass traffic from the Ethernet side to the radio side. We reset the AB remotely and then they
are on. I’m not sure this utility will
help us. I am also wary of putting any software on my clients machines, they do
enough damage on their own. I’m going to set up a cron job to send the snmp
reboot to all 100+ of my AB’s at 3 am. Mike Nitrous
Networks -----Original
Message----- We did not implement watchdog timer feature in the hardware,
however we have included this feature in our new firmware 1.4j.8 and 0.01.07. We also have a
(simple reset) smartbridges utiltiy called simplestatus and this utility for the airBridge, to be installed on the client
end. You can set the time interval
to check the association. On wireless link and if it is not
associated to the AP, it will automatically reset the aB. The client PC should be running this
software at back round screen. You can download the simpleStatus 090
at http://www.smartbridges.com/beta/utility/simpleStatus090.exe If any one interested, please try this software
and give us your feedback. Thank you Seeni, SB support -----Original
Message----- If
thats the cause why is it not working? maybe we need to focus on that if in
fact they do have a watchdog timer in the units already? but from my past
conversations about the effectiveness of the simple status and explaining this
type of feature "watchdog timer" should be in the firmware I got an
answer of hmmm we will look into it.. So to me that would indicate it is not in
there already? Sb can
you confirm?? Thanks ----- Original Message -----
Sent:
Monday, August 25, 2003 11:30 AM Subject: RE: [smartBridges] Remote Power Rebooters It has been in there since the product was released. The watchdog
timer is a hardware implimentation that preforms a hard reset when the firmware
quits responding. -----Original
Message-----
____________________________________________________ |
<<image001.gif>>
<<image001.gif>>
