Sevak, a 3way splitter will cause an aproximate 5dB loss at the overall Tx power. It has absolutely no influence to the RX (other than the insertion loss from the additional connectors used)
You might wanna use this setup in case your customers are spread in the area and it is not worth having 3 APs. Any time in the future you can simply add the other 2 APs and remove the splitter. Dimitri http://www.vernet.gr > Stuart Pierce> > Oh yea, without a doubt. > > ---------- Original Message ---------------------------------- > From: Sevak Avakians <[EMAIL PROTECTED]> > Reply-To: [EMAIL PROTECTED] > Date: 03 Sep 2003 11:29:41 -0400 > >>Quick question: >>If you have a 3-way splitter into 3 sector antennas and 1 APPO, is the >>quality improved by removing the splitter and using 3 APPOs? Is this >>the receive quality or transmit quality or both? >> >> > --- > [This E-mail scanned for viruses by Declude Virus By Avolve.net] > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
