I would think ti woudl work to you just have to make a mail to male cat 5 cable and all you would need to do was switch one POE to X over I think this is all just in theory but could work. I bet he has a customer tied in at that switch thats why it is there?
Quoting Rudolph Worrell <[EMAIL PROTECTED]>: > Hey, no laughing here. I am just getting started. > > Why the switch between AB and APPO? I thought it could go straight through > > from the AB to the APPO. > -- > Rudolph Worrell > President > Phone:(540)664-3950 > Fax:(270)458-6431 > www.wave2net.com > > > Quoting Pascal Losier <[EMAIL PROTECTED]>: > > > My set-up is has follow..... Don't laugh! > > > > > > Internet - Mikrotik - APPO - 10miles - AB/switch/APP - - - > > AB/custumer > > - 13mils - AB/switch/APP - - - - > > AB /switch/APP - - - AB/custumer > > - 8miles - AB/switch/APP - - - - > > AB/custumer > > > > the 13 miles links will be made soon. Im testing it in the shop for > > 1month. > > Both 2 other link are OK exept 1 AB I need to power cyle.every week. > > Actually I did a powercycle on the first day during the burning process. > > > > This set-up is OK for now but maybe it is wrong, Im just deploying it > > But only have around 10 custumer on it, > > I will sectorize in 3 later-on, right now it' omni > > > > Im waiting to get fiber, so I could install more custumer. > > I should have it in 3 weeks !. > > > > I do not want to leave the backhaul ABO in the feild if it is not ok ! > > I would like a CPE receiving the backhaul from the APP. > > > > I don't want to pay for a access point if a CPE can do more than 64 MAC > > without NAT. > > > > > > But if an Access point is need Then I will change them for APP. But if I > > can use a CPE than I will change for a CPE. > > > > In my book, a bridge should associate to 1 access point, & access point > > associate to many bridge. > > > > I can't see why this Airbridge is designe like this. It means my > > custumer cannot use an accessPoint without a router. > > > > It also mean that an Airbridge cannot support a buisness with many PC, > > or MAC address. > > > > I have 11 custumers that will have beetwen 30 & 50 PC, That make me > > think if the Airbridge is viable. > > > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of sB Tech Support > > Sent: Thursday, September 04, 2003 8:11 PM > > To: [EMAIL PROTECTED] > > Subject: RE: [smartBridges] Backhaul with Air bridge. > > > > > > > > How is your setup like, maybe I can help you figure out the best setup? > > Same as http://www.smartbridges.com/new/support/faq_ab.php#155 ? You got > > it working? What firmware version is loaded? If working, you should be > > happy, why you are afraid to deploy with airBridge? > > > > > > > > Alex > > > > sB Tech Support > > > > [EMAIL PROTECTED] > > > > > > > > -----Original Message----- > > From: Pascal Losier [mailto:[EMAIL PROTECTED] > > Sent: Friday, September 05, 2003 4:17 AM > > To: [EMAIL PROTECTED] > > Subject: [smartBridges] Backhaul with Air bridge. > > > > > > > > According to smartbridges, we can't do backhaul with an airbridge. > > > > For some reason Im testing with an Airbridge & it works ! > > > > I only hook up tree custumer with this wipop. > > > > Apparently, Airbridge is not transparent bridge like an APP. > > > > > > > > Why is it working ??? Im afraid to deploy with an airbridge,,, > > > > Maybe I should look for another CPE for backhaul. > > > > > > > ------------------------------------------------- > This mail sent through IMP: http://horde.org/imp/ > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges > <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > Martin Moreno Blazen Wireless 909-907-4106 www.blazenwireless.com ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
