Oh . . . I was under the impression that the smartbridge firmware hid all
the MAC's behind it.  The question is what version of firmware are you using
on the Airbridge?  I think 1.4 will show the PC's Mac.

Smartbridge, jump in any time.

  _____  

Jeremy

  _____  


-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Wayland
Sent: Wednesday, September 10, 2003 11:03 AM
To: [EMAIL PROTECTED]
Subject: Re: [smartBridges] Who's Responsible?


----- Original Message -----
From: "Jeremy Oswalt" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, September 10, 2003 3:06 PM
Subject: RE: [smartBridges] Who's Responsible?


> Just remember that he "could" request 2 leases depending on your setup;
one
> for the Airbridge and one from his computer.  Both would show the same MAC
> (the Airbridge MAC) if using new firmware.
>
> By the way, don't use his PC's MAC as suggested below.  You won't see it
on
> your end.
>
> But this all depends on how you have your Airbridge configured.  You could
> test and give the Airbridge a static IP, then see how many requests his
> computer makes.
>
>   _____
>

Jeremy

I am not sure why you say that we can't see the actual PC MAC. On my set up
we are seeing the PC MAC and successfully assign IP addresses to them using
DHCP. The firmware in the AP is 1.4j.6

Can you explain further?

Regards,
Wayland.







----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org  


----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges 
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org

Reply via email to