Whilst the repeater mode is fine, bite the bullet and use two radios... and instead of an aBT, I would recommend purchasing a aPPO plus an antenna. It may cost slightly more but is more flexible if your infrastructure ever changes. Short term pain... long term gain.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of [EMAIL PROTECTED] Sent: 16 September 2003 11:49 To: [EMAIL PROTECTED] Subject: [smartBridges] Repeater Site Question I need a little advice. I have a central Node with my backhaul coming into an APPO and then I am pushing this out via a 12dbi Omni to a 2km circle of clients. I now want to setup a repeater site at about 2.5km. 1. Can I install another APPO with another 12dbi Omni and set the APPO to Repeater Mode? I know I will half the bandwidth. 2. Should I install an Airbridge Total pointing back at the Main Omni and then install another APPO on a differnet channel with an Omni for my new clients? Which of the above 2 will work best? Does anyone have either of these setups? Any adivse would be appreciated Thanks Rob Airzone Broadband ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
