Hi Kirk Gildroy,

 

Please use the following utility or simpleDeploy to re flash the default configuration file to the unit.  Please remember that using this utility will RESET the device to factory default configuration and you need to reconfigure the device again.

http://www.smartbridges.com/beta/utility/RecoveryUtility.exe

 

Once you have done, please ensure that the primary port set to “wireless”. Now you should be able to get DHCP lease without any problem.

 

Please update us the status. Thank you

 

Kind regards,

Seeni

sB Tech support

 

 

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kirk Gildroy
Sent: Wednesday, October 22, 2003 12:24 AM
To: smartBridges
Subject: [smartBridges] Clients can't DHCP

 

I have a new APT that I'm having trouble with my clients not being able to

hit the DHCP server.  I have one other APT setup exactly the same way

associated with the same APP and the clients connected to it have no problem

with DHCP.  I am currently searching the archives to see if this has already

been answered but these folks needed to be set up like yesterday (as usual)

so please forgive me if this has already been addressed.  By the way, with

IP's setup static I have no problem hitting the IP address of the DHCP

server or anything else for that matter.  I'm pulling my hair out...please

help.

 

Kirk Gildroy

 

 

----------ANNOUNCEMENT----------

Don't forget to register for WISPCON IV

http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm

 

The PART-15.ORG smartBridges Discussion List

To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname>

To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)

Archives: http://archives.part-15.org 

Reply via email to