On Tue, 21 Oct 2003 11:00:21 -0600
"Kevin Proctor" <[EMAIL PROTECTED]> wrote:
> The normal cause for this is that the primary port is not set correctly.
> Here is how it should be set for the link below.
>
> dhcp server - switch - appo (backhaul) appo - switch - appo - abo
> ethernet wireless ethernet -
> wireless
Ok, after watching Windows reboot for 30 minutes, here's what I have
found:
1) The only way to the ABO is if I'm in the same net block as it is
(that's the reason for all the reboots).
2) I still have not got the DHCP response back through the ABO.
3) I stuck an Orinoco silver in my laptop, and got the DHCP response.
Went surfing just fine.
4) Orinoco cards are not good for sniffing wireless traffic :( (I'm using
Ethereal in Linux) Some recommendations are needed.
I have turned off encryption, set the ABO to open, no MAC authentication,
basically it's wide open for anyone to connect to, but I'm still not
getting the DHCP response :(
---
Homer Parker
LAN/WAN, Wireless Networking, PC Sales/Service
Linux, OS/2 and Windows Support
PC Services 785.483.7602
129 W 8th #101 [EMAIL PROTECTED]
Russell, KS 67665 http://www.pcsrvc.com
"So for the IT Manager Role, you want someone who's absolute crap, looks
reasonable on paper, and won't cause too much trouble. ... Well I don't
have any MCSEs on my books at the moment, but I could call around."
-- Simon Travaglia
----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org
