I have a customer who wants to network his office with 2 other locations. They are out in the middle of nowhere, no los between any location but they all have los to a tower we have access to.
The main office has a T-1. This will be a private network.
The 2 scenarios I have come up with is:
1. T-1 ---- APPO ----> APPO in C/B mode -------> ABO (2 in different locations).
2. T-1 ---- APPO ----> ABO === ethernet === APPO -----> ABO (2 in different locations).
(The bad thing about this set up is if the ABO on the tower looses association you
have to be on the other side of it to reboot remotely, this site is 140 miles from the office.)
Is there any other setup I should be aware of?
Thanks,
Dan Petermann Wyoming.com
----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org
