I haven't been to the sites yet. From what I gather it's about 6 miles to the T-1 to the tower.
The other 2 I don't know yet, but I'll be there on Wednesday. It's a chemical plant and 2 of their mine shafts.
Thanks,
Dan Petermann Wyoming.com
At 06:02 AM 10/28/2003 +0800, you wrote:
Hi Dan,
In the 1st scenario the aPPO will be used as a repeater and not in CB mode, if you are planning to use the CB mode then you will have to have another AP retransmitting the signal.
I hope that clarifies your question,
BTW what is the approx distance for each of the link, from T1 to Tower and then Tower to clients in 2 different locations?
Best Regards,
Vasu
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dan Petermann Sent: Tuesday, October 28, 2003 5:48 AM To: [EMAIL PROTECTED] Subject: [smartBridges] Set up Question
I have a customer who wants to network his office with 2 other locations. They are out in the middle of nowhere, no los between any location but they all have los to a tower we have access to.
The main office has a T-1. This will be a private network.
The 2 scenarios I have come up with is:
1. T-1 ---- APPO ----> APPO in C/B mode -------> ABO (2 in different locations).
2. T-1 ---- APPO ----> ABO === ethernet === APPO -----> ABO (2 in different locations). (The bad thing about this set up is if the ABO on the tower looses association you have to be on the other side of it to reboot remotely, this site is 140 miles from the office.)
Is there any other setup I should be aware of?
Thanks,
Dan Petermann Wyoming.com
----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org
----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org
