Make sure that the gateway is set correctly and the primary port is set to wireless. If you can't get out, set static IP address on the computer and the AB.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Wayland Sothcott Sent: Sunday, November 02, 2003 2:51 PM To: [EMAIL PROTECTED] Subject: [smartBridges] airBridge to an AP to WiFi NIC (MAC problem?) Hello, This may be a MAC address issue in the airBridge. Problem: I can see the network on one PC but not on another. This works; Internet===airPoint~~~airBridge===AP~~~WiFi PCI card(winXP) Connecting to the same AP this fails; Internet===airPoint~~~airBridge===AP~~~airBridge (v1.4)===PC(win98) If I manually set up the IP I can ping the PCs airBridge but not the APs airBridge. Basically the airBridge is not passing through to the AP. ~~~ Wireless === Ethernet AP is a ZEW3000 I have used this cheap AP many times in the loft of someones house to wireless it rather than use cables. However alothough I get good association signal strength with the airBridge to the AP I cannot pass pings. The same arrangement is operating fine with the generic PCI WiFi card on Win XP. It also works fine with USB WiFi devices. The reason for the using the airBridge in this situation was to get excellent signal strength in the building next door due to being able to relocate the device and attach an external antenna. Overkill really as we are now getting 100% RSSI. Should I downgrade to firmware v0.9.10 ? Regards, Wayland. The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
