Mike, On Sunday 02 Nov 2003 8:33 pm, you wrote: > Make sure that the gateway is set correctly and the primary port is set to > wireless. If you can't get out, set static IP address on the computer and > the AB. > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Wayland Sothcott > Sent: Sunday, November 02, 2003 2:51 PM > To: [EMAIL PROTECTED] > Subject: [smartBridges] airBridge to an AP to WiFi NIC (MAC problem?) > > Hello, > > This may be a MAC address issue in the airBridge. > > Problem: > I can see the network on one PC but not on another. > > This works; > Internet===airPoint~~~airBridge===AP~~~WiFi PCI card(winXP) > > Connecting to the same AP this fails; > Internet===airPoint~~~airBridge===AP~~~airBridge (v1.4)===PC(win98) > > If I manually set up the IP I can ping the PCs airBridge but not the APs > airBridge. > > Basically the airBridge is not passing through to the AP. > > ~~~ Wireless > === Ethernet > AP is a ZEW3000 > > > I have used this cheap AP many times in the loft of someones house to > wireless > it rather than use cables. However alothough I get good association signal > strength with the airBridge to the AP I cannot pass pings. The same > arrangement is operating fine with the generic PCI WiFi card on Win XP. It > also works fine with USB WiFi devices. The reason for the using the > airBridge > in this situation was to get excellent signal strength in the building next > door due to being able to relocate the device and attach an external > antenna. > Overkill really as we are now getting 100% RSSI. > > Should I downgrade to firmware v0.9.10 ? > > Regards, > Wayland. >
Yes, done all the obviousd stuff, sorry. The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
