The files on the Smartbridges website work as expected if you follow their instructions. http://www.smartbridges.com/new/support/mrtg.php
Yes, you can setup mrtg to produce a page locally. Here's one I use to get the number of associated clients on an APPO device: <snip> WorkDir: /home/sdwug/www/mrtg/gh Options[_]: growright, gauge, integer, nopercent, absolute, withzeroes YLegend[66.93.33.41_13]: Number of Users LegendI[66.93.33.41_13]: Num LegendO[66.93.33.41_13]: Num ShortLegend[66.93.33.41_13]: Users NoMib2: Yes LoadMIBs: sb_AT76C510.mib ### Interface 2 >> Descr: 'awc0' | Name: '' | Ip: '' | Eth: '' ### Timezone[66.93.33.41_13]: GMT+8 Target[66.93.33.41_13]: `/home/sdwug/mrtg-2/bin/sb-mrtg.pl -i 66.93.33.41 -c public -t s -y 9252` Legend2[66.93.33.41_13]: none Title[66.93.33.41_13]: Number of Pink Palace Users PageTop[66.93.33.41_13]: <H1>Number of Pink Palace Users</H1> MaxBytes[66.93.33.41_13]: 10 </snip> It produces this output: http://www.sdwug.org/mrtg/gh/66.93.33.41_13.html I haven't, as yet, been able to get a good RSSI/Signal Quality graph going apparently due to an authentication problem that requires a reset that I haven't got around to yet. hope this helps! cheers, michael http://sdwug.org / http://goldenhillfreeweb.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
