Just a question... with Orinoco AP's.. what were your CPE's? Lucent (orinoco) based CPE's do a massive broadcast for OSU network management that the APPO's don't acknoweldge. These broadcast dicovery packets are quite intensive I have found and will eat up usable bandwidth... PS.. have not found a way to turn them off either...
Scott -----Original Message----- From: "Shane Mitchell" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Date: Tue, 4 Nov 2003 14:45:45 -0600 Subject: RE: [smartBridges] Throughput Issues > Anywhere from 15 to 40 clients on each AP. > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Blazen Wireless > Sent: Tuesday, November 04, 2003 11:16 AM > To: [EMAIL PROTECTED] > Subject: Re: [smartBridges] Throughput Issues > > > I have the same problems I cant seem to get more out of them I don't > know what's wrong I have tired all the RTS settings all the firmwares > everything that SB has to offer and still cant get it to work. FYI how > many users do you have on each one? this sounds exactly the same setup > I > am running I have 30 on each radio with all kinds of latency problems > when multiple users are on. Pings go thru the roof and throughput > really > goes to hell. They claim the new XO series is more robust we shall see. > > > ----- Original Message ----- > From: Shane <mailto:[EMAIL PROTECTED]> Mitchell > To: [EMAIL PROTECTED] > Sent: Tuesday, November 04, 2003 7:58 AM > Subject: [smartBridges] Throughput Issues > > I recently installed 4 AirPoint Pro AP's that replaced 2 Orinoco > AP-2000. I have 4 90 degree sector antennae on top of a water tower. > I > was getting throughput to the clients at a peak of 2.5 Mpbs with the > Orinoco's. I am only getting a peak of about 1.6 Mpbs with the AP > Pro's > on each of the sectors. I am using Linksys Wet11's and had no problems > with them. I changed to the APPro's due to the Orinoco's resetting > themselves when overloading which was causing my clients to lose their > associations. > > I have made changes to RTS/CTS with little changes to performance. The > number of clients associated to each AP ranges from 10 to 40, but there > seems to be no difference in throughput, so it is not just the 40 > client > AP that is underperforming. All of the AP's go into a switch which > then > goes to my Packetshaper, and on to my router. > > Shane > > The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
