With the Tiltek I think all will be better. The grid will be right down the bore of the tiltek. We have think and plan though. If this SB's work We will be most likely selling our Wavebolt System which is currently on the tilteks.
Carl ----- Original Message ----- From: "Stuart Pierce" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, November 12, 2003 9:21 AM Subject: Re: [smartBridges] RSSI & Link values > What's the vbw of the 14dbi sector ? Could be that you need to adjust the 24dbi grid to get in the plane of the vbw. > > ---------- Original Message ---------------------------------- > From: "Carl A Jeptha" <[EMAIL PROTECTED]> > Reply-To: [EMAIL PROTECTED] > Date: Tue, 11 Nov 2003 22:28:43 -0800 > > >I have 14db1 90* corner and an 24dbi grid. > >I am on channel 6 and I do have people I have to talk to (walmart and a company doing a point to point) They are on channel one and 11. > > > >Carl > > ----- Original Message ----- > > From: Seeni Mohamed > > To: [EMAIL PROTECTED] > > Sent: Tuesday, November 11, 2003 6:25 AM > > Subject: RE: [smartBridges] RSSI & Link values > > > > > > Hi Carl, > > > > > > > > The low RSSI means, perhaps due to the channel interference. Please select the site survey option from the CPE and see if there is any other AP is running with nearby channels. The RSSI value may affects due to noise (SNR) and interference. This value can be improved by aligning the polarization or directivity of the antenna to reduce the noise level. Sometimes if there is high level of noise from the other transmitters (out of band) nearby the AP or CPE location may lower down the RSSI value of the CPE... > > > > Please let us know what type of antenna you are using on both ends along with the some information regarding the distance between the two links. > > > > > > > > Thank you > > > > > > > > Kind regards, > > > > Seeni > > > > sB Tech Support > > > > > > > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Carl A Jeptha > > Sent: Tuesday, November 11, 2003 8:33 PM > > To: [EMAIL PROTECTED] > > Subject: [smartBridges] RSSI & Link values > > > > > > > > My Link value is 85-90% > > > > My Rssi value is 52-55% > > > > Distance is 10 miles. > > > > > > > > What is the problem???? > > > > I am assuming interference. > > > > > > > > Carl > > > > > --- > [This E-mail scanned for viruses by Declude Virus By Avolve.net] > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
