BGP does not do muxing. It does per destination or per packet load balancing.
Scott Quoting Shawn Mitchell <[EMAIL PROTECTED]>: *<*>* Setup ppp and kill your CPU... better to setup bgp between the two *<*>* routers *<*>* and do it that way. You'll get the full 3 meg from two DS-1's. *<*>* *<*>* -----Original Message----- *<*>* From: [EMAIL PROTECTED] *<*>* [mailto:[EMAIL PROTECTED] Behalf Of [EMAIL PROTECTED] *<*>* Sent: Saturday, November 15, 2003 9:06 AM *<*>* To: [EMAIL PROTECTED] *<*>* Subject: Re: [smartBridges] Multiple T1 Question *<*>* *<*>* *<*>* You don't nessecarily need to purchase a bonded T1. You can just *<*>* purchase *<*>* another t1. If you have a cisco router all you need to do is setup ppp *<*>* multilink between your two serial interfaces that your t1's are coming in *<*>* on *<*>* and you can get roughly 2.9MB out of it. *<*>* *<*>* Quoting Blazen Wireless <[EMAIL PROTECTED]>: *<*>* *<*>* > We have not converted everybody over to the new line yet Right now we *<*>* are *<*>* > waiting for the new SB line to come out so we can swap out the APPO's *<*>* we *<*>* > have up there that are working like crap with a total of 60 users *<*>* between *<*>* 2 *<*>* > APPO's that is our weak link now. *<*>* > *<*>* > *<*>* > Doing a ping to yahoo from at&t lines from the noc it blows away *<*>* megapath *<*>* we *<*>* > get 20 ms right to them almost everytime with megapath it jumps all *<*>* over *<*>* the *<*>* > place and the lowest I have seen is maybe 50-60ms and highs as much as *<*>* 150 *<*>* > 200ms. Well worth the money we spent to go with AT&T so when our lease *<*>* is *<*>* up *<*>* > with megapath we are going to order another t-1 from AT&T and we will *<*>* have *<*>* > 4.5 megs available! *<*>* > *<*>* > The AT&T was more we pay about $1600 for the managed 3600 Cisco and *<*>* the *<*>* dual *<*>* > t-1's with megapath we have a cheap siemens router we control that *<*>* they *<*>* made *<*>* > us pay for and we manage it ourselves it runs $651 for the month. *<*>* > *<*>* > Overall like I said AT&T is awesome we had to pay $1600 as a deposit *<*>* since *<*>* > we have not established a lot of credit but they charged us $0 install *<*>* and *<*>* > $0 for the router... so anyone else with a better credit rating will *<*>* do *<*>* > better and may not have to pay the $1600 deposit... *<*>* > *<*>* > -M *<*>* > ----- Original Message ----- *<*>* > From: "Pascal Losier" <[EMAIL PROTECTED]> *<*>* > To: <[EMAIL PROTECTED]> *<*>* > Sent: Friday, November 14, 2003 4:17 PM *<*>* > Subject: RE: [smartBridges] Multiple T1 Question *<*>* > *<*>* > *<*>* > How many custumer on 2.9Mb ??? *<*>* > *<*>* > -----Original Message----- *<*>* > From: [EMAIL PROTECTED] *<*>* > [mailto:[EMAIL PROTECTED] On Behalf Of Blazen Wireless *<*>* > Sent: Friday, November 14, 2003 8:15 PM *<*>* > To: [EMAIL PROTECTED] *<*>* > Subject: Re: [smartBridges] Multiple T1 Question *<*>* > *<*>* > *<*>* > AT&T and its awesome!! we have 2 T-1a bonded to 3 meg which we see on *<*>* > avg 2.6 -2.9 megs *<*>* > ----- Original Message ----- *<*>* > From: "Rick Kosick" <[EMAIL PROTECTED]> *<*>* > To: <[EMAIL PROTECTED]> *<*>* > Sent: Friday, November 14, 2003 4:02 PM *<*>* > Subject: [smartBridges] Multiple T1 Question *<*>* > *<*>* > *<*>* > Does anyone out there currently use a provider that will bond (mux) *<*>* > multiple T1s? I can only find providers who will load-balance for *<*>* > aggregate bandwidth and I don't need T3. *<*>* > *<*>* > Please email me offlist. [EMAIL PROTECTED] *<*>* > Thanks!! *<*>* > *<*>* > === *<*>* > Rick Kosick *<*>* > StarLinX Internet Service *<*>* > *<*>* > The PART-15.ORG smartBridges Discussion List *<*>* > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe *<*>* > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in *<*>* > the body type unsubscribe *<*>* > smartBridges) *<*>* > Archives: http://archives.part-15.org *<*>* > *<*>* > *<*>* > The PART-15.ORG smartBridges Discussion List *<*>* > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe *<*>* > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in *<*>* > the body type unsubscribe smartBridges) *<*>* > Archives: http://archives.part-15.org *<*>* > *<*>* > *<*>* > *<*>* > *<*>* > The PART-15.ORG smartBridges Discussion List *<*>* > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe *<*>* > smartBridges <yournickname> *<*>* > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe *<*>* > smartBridges) *<*>* > Archives: http://archives.part-15.org *<*>* > *<*>* > *<*>* > The PART-15.ORG smartBridges Discussion List *<*>* > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe *<*>* smartBridges *<*>* > <yournickname> *<*>* > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe *<*>* > smartBridges) *<*>* > Archives: http://archives.part-15.org *<*>* > *<*>* *<*>* *<*>* *<*>* *<*>* ------------------------------------------------- *<*>* SCI Online Email http://webmail.scinternet.net/ *<*>* The PART-15.ORG smartBridges Discussion List *<*>* To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe *<*>* smartBridges <yournickname> *<*>* To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe *<*>* smartBridges) *<*>* Archives: http://archives.part-15.org *<*>* *<*>* The PART-15.ORG smartBridges Discussion List *<*>* To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe *<*>* smartBridges <yournickname> *<*>* To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe *<*>* smartBridges) *<*>* Archives: http://archives.part-15.org *<*>* *<*>* The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
