I'm running the 1.4j.9 firmware. No good? ----- Original Message ----- From: "Blazen Wireless" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, November 15, 2003 11:54 PM Subject: Re: [smartBridges] APPO(AP) to APPO(CB) Problem
> what version firmware do you have. It sounds like a if it were losing > association because it did not see the AP anymore this typical from what I > can tell and why the came out with the watchdog timer in the latest firmware > to auto reboot the client units.... > > > ----- Original Message ----- > From: "Rick Kosick" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Saturday, November 15, 2003 8:46 PM > Subject: [smartBridges] APPO(AP) to APPO(CB) Problem > > > Okay, new problem. > > I have an APPO in AP mode and an APPO in CB mode. > > If I power off the APPO(AP) and leave the APPO(CB) running for a while.... > then go and repower the APPO(AP) back on, I get associated and there are > packets on the wireless going back and forth, but there is no IP > connectivity. smartMonitor finds the AP but not the CB. > > The only way to solve this is to reset the CB. > === > Rick Kosick > StarLinX Internet Service > > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org > The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
