-----Original
Message-----
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Seeni Mohamed
Sent: Friday,
November 21, 2003 8:42 PM
To: [EMAIL PROTECTED]
Subject: RE: [smartBridges] Can't
remotely access APPO
Please use the following version of simpleMonitor(BETA
release) to login from the wireless side. If prompted for the firmware upgrade,
please press “No” to
continue.
airPointPro 1.7
(firmware 1.4k1)
This firmware is still under BETA release.
If still unable to login, then use the recovery
software from the Ethernet side to re flash the configuration. Please note that
the recovery software will erase the settings and it is required to reconfigure
again.
http://www.smartbridges.com/beta/utility/RecoveryUtility.exe
Kind regards,
Seeni
sB Tech Support
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of [EMAIL PROTECTED]
Sent: Saturday, November 22, 2003 7:51 AM
To: [EMAIL PROTECTED]
Subject: Re: [smartBridges] Can't remotely access APPO
My APPO in client bridge mode for the backhaul acts
the same. I can log on
from the ethernet side but not from the radio side.
----- Original Message -----
From: "Sam" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, November 21, 2003 10:07 AM
Subject: Re: [smartBridges] Can't remotely access APPO
> Same here. The radio seems to be working, but it
will not respond to pings
> nor can I log into it. But I can ping through it
to radios and customers
> on the other side.
>
> When I have asked about it, I'm told "check
the default gateway". But
> it is correct. I guess as long as it's working I
shouldn't look a gift
> horse in the mouth. :)
>
>
> On Fri, 21 Nov 2003, Roger Howard wrote:
>
> > I have this on several of my radios... and
they all have default gateway
and
> > default port set correctly.
> >
> >
> > ----- Original Message -----
> > From: "David Moss"
<[EMAIL PROTECTED]>
> > To: <[EMAIL PROTECTED]>
> > Sent: Friday, November 21, 2003 9:40 AM
> > Subject: Re: [smartBridges] Can't remotely
access APPO
> >
> >
> > > I had this - had to run the recovery
software directly to the APPO and
re
> > > simply deploy the settings - then it
worked fine - simply reverting
back
> > to
> > > SB factory config wasn't enough.
> > > ----- Original Message -----
> > > From: "Bill Flood"
<[EMAIL PROTECTED]>
> > > To: <[EMAIL PROTECTED]>
> > > Sent: Friday, November 21, 2003 1:03 AM
> > > Subject: [smartBridges] Can't remotely
access APPO
> > >
> > >
> > > > I have a APPO of which I cannot
access remotely. At the site I can
jack
> > > in
> > > > and get to the utility. It's
not even snmp, I can't even ping this
> > APPO.
> > > >
> > > > Any ideas?
> > > >
> > > > Bill Flood
> > > > AirRunner Networks LLC --- We make
the web fast!
> > > > If you get tired of the wait call
715-443-3700!
> > > > www.airrun.net
> > > >
> > > > The PART-15.ORG smartBridges
Discussion List
> > > > To Join: mailto:[EMAIL PROTECTED]
(in the body type subscribe
> > > smartBridges <yournickname>
> > > > To Remove:
mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> > > smartBridges)
> > > > Archives:
http://archives.part-15.org
> > > >
> > >
> > > The PART-15.ORG smartBridges Discussion
List
> > > To Join: mailto:[EMAIL PROTECTED]
(in the body type subscribe
> > smartBridges <yournickname>
> > > To Remove: mailto:[EMAIL PROTECTED]
(in the body type unsubscribe
> > smartBridges)
> > > Archives: http://archives.part-15.org
> > >
> >
> > The PART-15.ORG smartBridges Discussion List
> > To Join: mailto:[EMAIL PROTECTED] (in the
body type subscribe
smartBridges <yournickname>
> > To Remove: mailto:[EMAIL PROTECTED] (in
the body type unsubscribe
smartBridges)
> > Archives: http://archives.part-15.org
> >
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body
type subscribe
smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the
body type unsubscribe
smartBridges)
> Archives: http://archives.part-15.org
>
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type
subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body
type unsubscribe smartBridges)
Archives: http://archives.part-15.org
