Re: [smartBridges] Bandwidth issues still

[Sevak Avakians]

Title: Message

Try keeping the CTS only on the CPEs and turn off all frag on APs and CPEs? On Wed, 2003-11-26 at 20:04, Blazen Wireless wrote:  Yes I have played around with them many times I think the best was about 256 CTS and 1024 Fragmentation I just now changed everything back to 2346 on both as a test. After further checking on the Cicso switch it to shows some errors on the ports the APPO's are connected to. On the Port that the Canopy is on it shows 0 errors...     If you want to take a look at the Cisco switch its on a public IP contact me off line and I will give you the password and IP info if you want I can also try and figure out how to give you vpn access to the radios as well..         ----- Original Message ----- From: Sevak Avakians To: [EMAIL PROTECTED] Sent: Wednesday, November 26, 2003 4:56 PM Subject: Re: [smartBridges] Bandwidth issues still Ok, I've skipped a bunch of emails so forgive me if I ask you this: have you configured the RTS/CTS settings?  What are they at? Sevak On Wed, 2003-11-26 at 19:07, Blazen Wireless wrote: Okay today we went to the tower and put in a Cisco switch forcing the APPOs to 10 meg 1.2 duplex. I still see errors on the SB units in fact MORE collisions then before and MORE SingleDefer Packets?   I am at a loss any other ideas? the Cisco reports ZERO errors on the LAN side to either APPO or the Canopy unit..