RE: [smartBridges] Warped ABT Cover Revisited

[Todd Barber]

Title: Message

I have seen this also on an APPO deployed on a water tank.  No heat sources.  We cleaned it up and sealed the seam with silicone caulk before redeploying.    Todd Barber Skylink Broadband Internet [EMAIL PROTECTED] 970-454-9499   -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Nimesh D. Parikh Sent: Monday, November 24, 2003 7:33 PM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] Warped ABT Cover Revisited   This is strange. Are these units located near some heat source? Perhaps chimney or something similar? We use boxes made from Poly Carbonate material suitable for outdoor environment and extreme temperature variations.   Nimesh     From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Pascal Losier Sent: Tuesday, November 25, 2003 8:32 AM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] Warped ABT Cover Revisited   I have notice the same on a APPO & ABO -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Don Castella Sent: Monday, November 24, 2003 8:19 PM To: [EMAIL PROTECTED] Subject: [smartBridges] Warped ABT Cover Revisited Today we inspected an ABT that had been deployed outdoors for about 5 months, and found the front cover warped enough to probably allow water to leak into the unit. All four cover edges were warped. The cover retaining screws were still tight and had never been removed.