I have seen this also in some cases so you are not alone. Anyone with a clue as to what is happening here?
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of shoffman Sent: Tuesday, November 25, 2003 6:43 PM To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: [smartBridges] upload vs download Hi all, Know this has been discussed several times.. hate to repeat an old topic. Here is scenario: Customer has ABTotal. RSSI 75%, Link quality 95% on its reading. Long Preamble, 5 MBps auto (also tried at 11 Mbps auto). Frag set at two different levels: 512 and 2336 (off) RTS set at two different levels (4combos in all): 128 and 2337 (off) Ethernet card at 10 - 1/2 duplex AP is Cisco 350 - RTS Off, Frag 2336. Signal Strength at 50%. In all cases: Download 600-800 kbps, upload (best with RTS off) 36 kbps, with RTS 8 kbps. Network has RTS on all other devices pointed at that AP at 128. So... thoughts? We are going to re-terminate...go with an outdoor and parabolic.. But is this interfernce? SB device see no other signal, have not sent out an SA yet. All other clients are doing pretty good on this network. We will send an SA out to be sure, but still..... Thoughts Scott The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
