If you have to, take each radio off line, 1 at a time and test. If no change, then that
1 radio wasn't the problem. Put it back on line and try the next one.
I haven't found Frag to do much on MY network, YMMV. RTS on the other hand has
made rotten connections work great. Just today by changing RTS on a client to 1200
changed his download speeds from 380k to 1.2M.
As much as I hate to say this, you are going to have to check all your links. See which ones
are running great and which ones are sucking wind. Compare both ends of the radio link.
I've worked on radio links for 20 years and all I can say it can be quite frustrating. Too bad that
in this price range the troubleshooting tools are virtually nonexistent. 802.11b is a PITA to
troubleshoot.
On Tuesday, November 25, 2003, at 04:44 PM, Rudolph Worrell wrote:
I have seen this also in some cases so you are not alone. Anyone with a
clue as to what is happening here?
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of shoffman Sent: Tuesday, November 25, 2003 6:43 PM To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: [smartBridges] upload vs download
Hi all,
Know this has been discussed several times.. hate to repeat an old topic.
Here is scenario:
Customer has ABTotal. RSSI 75%, Link quality 95% on its reading. Long Preamble, 5 MBps auto (also tried at 11 Mbps auto).
Frag set at two different levels: 512 and 2336 (off) RTS set at two different levels (4combos in all): 128 and 2337 (off)
Ethernet card at 10 - 1/2 duplex
AP is Cisco 350 - RTS Off, Frag 2336. Signal Strength at 50%.
In all cases: Download 600-800 kbps, upload (best with RTS off) 36 kbps,
with RTS 8 kbps.
Network has RTS on all other devices pointed at that AP at 128.
So... thoughts? We are going to re-terminate...go with an outdoor and
parabolic.. But is this interfernce? SB device see no other signal,
have not sent out an SA yet. All other clients are doing pretty good on
this network. We will send an SA out to be sure, but still.....
Thoughts
Scott
The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org
The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
