found on smartmontools-support.
smartctl version 5.33 [i586-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: Maxtor 92040U6
Serial Number: C603CXMC
Firmware Version: MA540RR0
User Capacity: 20,419,854,336 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 4
ATA Standard is: ATA/ATAPI-4 T13 1153D revision 17
Local Time is: Mon Aug 1 15:03:54 2005 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 20) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000a 253 252 000 Old_age Always
- 4788888923287
3 Spin_Up_Time 0x0027 224 224 063 Pre-fail Always
- 87
4 Start_Stop_Count 0x0032 253 253 000 Old_age Always
- 237
5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail Always
- 0
6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline
- 0
7 Seek_Error_Rate 0x000a 253 251 000 Old_age Always
- 51400
8 Seek_Time_Performance 0x0027 244 243 187 Pre-fail Always
- 141300130324730
9 Power_On_Hours 0x0032 208 208 000 Old_age Always
- 947266
10 Spin_Retry_Count 0x002b 253 252 223 Pre-fail Always
- 84
11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always
- 66
12 Power_Cycle_Count 0x0032 253 253 000 Old_age Always
- 360
196 Reallocated_Event_Count 0x0008 253 253 000 Old_age Offline
- 0
197 Current_Pending_Sector 0x0008 253 253 000 Old_age Offline
- 0
198 Offline_Uncorrectable 0x0008 253 253 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x0008 199 199 000 Old_age Offline
- 0
200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always
- 252735
201 Soft_Read_Error_Rate 0x000a 251 251 000 Old_age Always
- 8461085961367
202 TA_Increase_Count 0x000a 253 252 000 Old_age Always
- 388247
203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always
- 60129930391
204 Shock_Count_Write_Opern 0x000a 253 252 000 Old_age Always
- 388247
205 Shock_Rate_Write_Opern 0x000a 253 252 000 Old_age Always
- 388247
207 Spin_High_Current 0x002a 253 252 000 Old_age Always
- 84
208 Spin_Buzz 0x002a 253 252 000 Old_age Always
- 84
209 Offline_Seek_Performnce 0x0024 253 253 000 Old_age Offline
- 0
96 Unknown_Attribute 0x0004 253 253 000 Old_age Offline
- 0
97 Unknown_Attribute 0x0004 253 253 000 Old_age Offline
- 0
98 Unknown_Attribute 0x0004 253 253 000 Old_age Offline
- 0
99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline
- 0
100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline
- 0
101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline
- 0
SMART Error Log Version: 1
Warning: ATA error count 7323 inconsistent with error log pointer 5
ATA Error Count: 7323 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 7323 occurred at disk power-on lifetime: 14801 hours (616 days + 17 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
da b0 00 00 4f c2 e0 Device Fault
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
b0 da 01 00 4f c2 e0 08 2d+02:25:25.120 SMART RETURN STATUS
c8 00 2e 08 89 e1 e1 08 2d+02:25:25.120 READ DMA
c8 00 ae 08 78 e1 e1 08 2d+02:25:25.104 READ DMA
ec 00 2d 00 e7 01 e0 08 2d+02:25:25.088 IDENTIFY DEVICE
ca 00 26 08 e7 01 e0 08 2d+02:25:20.720 WRITE DMA
Error 7322 occurred at disk power-on lifetime: 14800 hours (616 days + 16 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 08 00 00 00 00 a0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
08 00 01 00 00 00 a0 08 00:00:21.584 DEVICE RESET
c4 00 00 01 00 00 e0 00 00:00:17.616 READ MULTIPLE
c4 00 00 01 00 00 e0 00 00:00:17.616 READ MULTIPLE
c4 00 00 01 00 00 e0 00 00:00:17.600 READ MULTIPLE
b0 d9 01 10 4f c2 a0 00 00:00:14.688 SMART DISABLE OPERATIONS
Error 7321 occurred at disk power-on lifetime: 14800 hours (616 days + 16 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 08 00 00 00 00 a0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
08 00 01 00 00 00 a0 08 00:00:16.336 DEVICE RESET
c4 00 00 01 00 00 e0 00 00:00:12.352 READ MULTIPLE
c4 00 00 01 00 00 e0 00 00:00:12.352 READ MULTIPLE
c4 00 00 01 00 00 e0 00 00:00:12.352 READ MULTIPLE
b0 d9 01 10 4f c2 a0 00 00:00:08.928 SMART DISABLE OPERATIONS
Error 7320 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
08 a8 01 01 00 80 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
a8 08 01 01 00 80 00 00 00:00:07.456 [RESERVED]
a0 08 01 01 00 80 00 00 00:00:07.440 PACKET
a0 08 01 01 00 80 00 00 00:00:07.440 PACKET
80 08 01 01 00 80 00 00 00:00:07.424 [VENDOR SPECIFIC]
Error 7319 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
08 a0 01 01 00 80 00 Device Fault
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
a0 08 01 01 00 80 00 00 00:00:07.440 PACKET
a0 08 01 01 00 80 00 00 00:00:07.440 PACKET
80 08 01 01 00 80 00 00 00:00:07.424 [VENDOR SPECIFIC]
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Device does not support Selective Self Tests/Logging
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
