Hi,
My external Western Digital USB2.0 "Elements" model WD5000E035 (containing a
WD5000AAVS drive) is missing from the database and I would like to get it
added. I testedthis with the latest version of Smartmontools.
smartctl 5.39 2009-02-16 19:57 [i686-pc-mingw32-xp-sp3] (local build)
I don't know if this is related to it being missing from the database but
when i run it without the -dsat parameters I receive:
/dev/sdc: Unable to detect device type
Smartctl: please specify device type with the -d option.
Running with -dsat causes smartmontools to work fine. I have attached log
file for you so you can add drive to database. Please note I starred out
the drive serial number for privacy reasons.
Regards,
Richard
smartctl 5.39 2009-02-16 19:57 [i686-pc-mingw32-xp-sp3] (local build)
Copyright (C) 2002-9 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: WDC WD5000AAVS-00ZTB0
Serial Number: WD-************
Firmware Version: 01.01B01
User Capacity: 500,107,862,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sun Feb 22 01:18:36 2009 GMTST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (13980) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 163) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always
- 0
3 Spin_Up_Time 0x0003 163 161 021 Pre-fail Always
- 4841
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always
- 905
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always
- 0
7 Seek_Error_Rate 0x000e 100 253 051 Old_age Always
- 0
9 Power_On_Hours 0x0032 092 092 000 Old_age Always
- 6037
10 Spin_Retry_Count 0x0012 100 100 051 Old_age Always
- 0
11 Calibration_Retry_Count 0x0012 100 253 051 Old_age Always
- 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 56
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always
- 3
193 Load_Cycle_Count 0x0032 197 197 000 Old_age Always
- 10930
194 Temperature_Celsius 0x0022 112 104 000 Old_age Always
- 35
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
200 Multi_Zone_Error_Rate 0x0008 200 200 051 Old_age Offline
- 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 6005 -
# 2 Short captive Interrupted (host reset) 90% 6005 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
------------------------------------------------------------------------------
Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA
-OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise
-Strategies to boost innovation and cut costs with open source participation
-Receive a $600 discount off the registration fee with the source code: SFAD
http://p.sf.net/sfu/XcvMzF8H
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
