I could find no data sheet on the web. Most attributes
make no sense without documentation. Someone should contact
Indilinx and ask for a description of the values.

smartctl version 5.38 [x86_64-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     OCZ-VERTEX 1199
Serial Number:    XGR2WVUGE842V064Z3VP
Firmware Version: 00.P97
User Capacity:    32,641,748,992 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   7
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Sat Mar 21 14:32:42 2009 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                 (   0) seconds.
Offline data collection
capabilities:                    (0x1d) SMART execute Offline immediate.
                                        No Auto Offline data collection support.
                                        Abort Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        No Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   0) minutes.
Extended self-test routine
recommended polling time:        (   0) minutes.

SMART Attributes Data Structure revision number: 5
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED 
WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x0000   008   000   000    Old_age   Offline 
In_the_past 0
  9 Power_On_Hours          0x0000   089   000   000    Old_age   Offline 
In_the_past 0
 12 Power_Cycle_Count       0x0000   006   000   000    Old_age   Offline 
In_the_past 0
184 Unknown_Attribute       0x0000   011   000   000    Old_age   Offline 
In_the_past 0
195 Hardware_ECC_Recovered  0x0000   000   000   000    Old_age   Offline 
FAILING_NOW 0
196 Reallocated_Event_Count 0x0000   000   000   000    Old_age   Offline 
FAILING_NOW 0
197 Current_Pending_Sector  0x0000   000   000   000    Old_age   Offline 
FAILING_NOW 0
198 Offline_Uncorrectable   0x0000   170   243   000    Old_age   Offline      -
      1790
199 UDMA_CRC_Error_Count    0x0000   057   091   000    Old_age   Offline      -
      2290
200 Multi_Zone_Error_Rate   0x0000   191   139   000    Old_age   Offline      -
      55
201 Soft_Read_Error_Rate    0x0000   235   015   000    Old_age   Offline      -
      63
202 TA_Increase_Count       0x0000   061   019   000    Old_age   Offline      -
      0
203 Run_Out_Cancel          0x0000   096   245   000    Old_age   Offline      -
      1
204 Shock_Count_Write_Opern 0x0000   000   000   000    Old_age   Offline 
FAILING_NOW 0
205 Shock_Rate_Write_Opern  0x0000   160   134   000    Old_age   Offline      -
      1
206 Flying_Height           0x0000   000   000   000    Old_age   Offline 
FAILING_NOW 0
207 Spin_High_Current       0x0000   016   001   000    Old_age   Offline      -
      0
208 Spin_Buzz               0x0000   103   000   000    Old_age   Offline 
In_the_past 0
209 Offline_Seek_Performnce 0x0000   100   000   000    Old_age   Offline 
In_the_past 0

Warning! SMART ATA Error Log Structure error: invalid SMART checksum.
SMART Error Log Version: 1
No Errors Logged

Warning! SMART Self-Test Log Structure error: invalid SMART checksum.
SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


Device does not support Selective Self Tests/Logging



------------------------------------------------------------------------------
Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
easily build your RIAs with Flex Builder, the Eclipse(TM)based development
software that enables intelligent coding and step-through debugging.
Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database

Reply via email to