Markus Trippelsdorf wrote: > On Sat, Mar 21, 2009 at 06:43:37PM +0100, Christian Franke wrote: >> Markus Trippelsdorf wrote: >> > I could find no data sheet on the web. Most attributes >> > make no sense without documentation. Someone should contact >> > Indilinx and ask for a description of the values. >> > >> > >> >> Looks like even the general data format of the attributes part is broken. >> (In the ATA Standard, this is a "Vendor Specific" black box in the SMART >> data block). > > Yes, and it will be hard to figure out what the attributes mean without > help from the vendor.
There is some information available from the vendor, see http://www.ocztechnologyforum.com/forum/showthread.php?t=57898&highlight=crystal BTW, the same controller is also being used now in a number of other products: * Corsair: "Extreme Series" * SuperTalent: "Ultradrive" * Gskill: "Falcon" * Patriot Memory: "Torqx" * Mushkin: "Europe 2" On our OCZ vertex drive, I do see a reasonable value for "remaining life time" (Attribute 209), but the value for "Erase count Average" seems to "overflow", once it rises > 255, it becomes 0 again... any idea how to fix this? Local output of smartctl -a below: > smartctl version 5.37 [x86_64-redhat-linux-gnu] Copyright (C) 2002-6 Bruce > Allen > Home page is http://smartmontools.sourceforge.net/ > > === START OF INFORMATION SECTION === > Device Model: OCZ-VERTEX > Serial Number: I4SPN7IC949UOPC2H195 > Firmware Version: 1.30 > User Capacity: 256,060,514,304 bytes > Device is: Not in smartctl database [for details use: -P showall] > ATA Version is: 7 > ATA Standard is: Exact ATA specification draft version not indicated > Local Time is: Mon Jul 27 22:05:10 2009 CEST > SMART support is: Available - device has SMART capability. > SMART support is: Enabled > > === START OF READ SMART DATA SECTION === > SMART overall-health self-assessment test result: PASSED > See vendor-specific Attribute list for marginal Attributes. > > General SMART Values: > Offline data collection status: (0x00) Offline data collection activity > was never started. > Auto Offline Data Collection: > Disabled. > Self-test execution status: ( 0) The previous self-test routine > completed > without error or no self-test has > ever > been run. > Total time to complete Offline > data collection: ( 0) seconds. > Offline data collection > capabilities: (0x1d) SMART execute Offline immediate. > No Auto Offline data collection > support. > Abort Offline collection upon new > command. > Offline surface scan supported. > Self-test supported. > No Conveyance Self-test supported. > No Selective Self-test supported. > SMART capabilities: (0x0003) Saves SMART data before entering > power-saving mode. > Supports SMART auto save timer. > Error logging capability: (0x00) Error logging NOT supported. > General Purpose Logging supported. > Short self-test routine > recommended polling time: ( 0) minutes. > Extended self-test routine > recommended polling time: ( 0) minutes. > > SMART Attributes Data Structure revision number: 16 > Vendor Specific SMART Attributes with Thresholds: > ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED > WHEN_FAILED RAW_VALUE > 1 Raw_Read_Error_Rate 0x0000 008 000 000 Old_age Offline > In_the_past 0 > 9 Power_On_Hours 0x0000 060 010 000 Old_age Offline > - 0 > 12 Power_Cycle_Count 0x0000 001 000 000 Old_age Offline > In_the_past 0 > 184 Unknown_Attribute 0x0000 232 000 000 Old_age Offline > In_the_past 0 > 195 Hardware_ECC_Recovered 0x0000 005 000 000 Old_age Offline > In_the_past 0 > 196 Reallocated_Event_Count 0x0000 000 000 000 Old_age Offline > FAILING_NOW 0 > 197 Current_Pending_Sector 0x0000 000 000 000 Old_age Offline > FAILING_NOW 0 > 198 Offline_Uncorrectable 0x0000 238 096 000 Old_age Offline > - 522900 > 199 UDMA_CRC_Error_Count 0x0000 070 199 000 Old_age Offline > - 475082 > 200 Multi_Zone_Error_Rate 0x0000 055 087 000 Old_age Offline > - 22931 > 201 Soft_Read_Error_Rate 0x0000 058 216 000 Old_age Offline > - 21869 > 202 TA_Increase_Count 0x0000 086 188 000 Old_age Offline > - 4 > 203 Run_Out_Cancel 0x0000 241 187 000 Old_age Offline > - 3 > 204 Shock_Count_Write_Opern 0x0000 000 000 000 Old_age Offline > FAILING_NOW 0 > 205 Shock_Rate_Write_Opern 0x0000 160 134 000 Old_age Offline > - 1 > 206 Flying_Height 0x0000 001 000 000 Old_age Offline > In_the_past 0 > 207 Spin_High_Current 0x0000 192 029 000 Old_age Offline > - 0 > 208 Spin_Buzz 0x0000 059 004 000 Old_age Offline > - 0 > 209 Offline_Seek_Performnce 0x0000 099 000 000 Old_age Offline > In_the_past 0 > 210 Unknown_Attribute 0x0000 238 000 000 Old_age Offline > In_the_past 0 > 211 Unknown_Attribute 0x0000 000 000 000 Old_age Offline > FAILING_NOW 0 > > Warning: device does not support Error Logging > Warning! SMART ATA Error Log Structure error: invalid SMART checksum. > SMART Error Log Version: 1 > No Errors Logged > > Warning! SMART Self-Test Log Structure error: invalid SMART checksum. > SMART Self-test log structure revision number 1 > No self-tests have been logged. [To run self-tests, use: smartctl -t] > > > Device does not support Selective Self Tests/Logging Regards, Peter Niemayer ------------------------------------------------------------------------------ Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july _______________________________________________ Smartmontools-database mailing list Smartmontools-database@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/smartmontools-database
