Hi,
I was having some issues with my laptop drive (boot failures, duplicated inode
references...) so I was trying to use smartmontools to debug them.
I found that my drive is not in your database so I thought to send you its
informations as per the site faq.
The drive is related to a HP Pavillon tx2506el.
Regards,
Gabriele Messineo
gabri...@puma:~$ sudo smartctl -a /dev/sda
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: ST9250827AS
Serial Number: 5RG28B7Z
Firmware Version: 3.AHC
User Capacity: 250,059,350,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Fri Mar 20 19:50:21 2009 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 426) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 93) minutes.
SCT capabilities: (0x0035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always
- 0
3 Spin_Up_Time 0x0002 099 099 000 Old_age Always
- 0
4 Start_Stop_Count 0x0033 100 100 020 Pre-fail Always
- 260
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always
- 0
7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail Always
- 4311231936
9 Power_On_Hours 0x0032 100 100 000 Old_age Always
- 291
10 Spin_Retry_Count 0x0013 100 100 034 Pre-fail Always
- 0
12 Power_Cycle_Count 0x0033 100 100 020 Pre-fail Always
- 236
184 Unknown_Attribute 0x0033 100 253 097 Pre-fail Always
- 0
187 Reported_Uncorrect 0x003a 100 100 000 Old_age Always
- 0
188 Unknown_Attribute 0x0032 100 097 000 Old_age Always
- 22
189 High_Fly_Writes 0x0032 100 100 000 Old_age Always
- 0
190 Airflow_Temperature_Cel 0x0032 060 043 040 Old_age Always
- 40 (Lifetime Min/Max 17/57)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always
- 233
192 Power-Off_Retract_Count 0x003a 100 100 000 Old_age Always
- 171
193 Load_Cycle_Count 0x0012 093 093 000 Old_age Always
- 15791
194 Temperature_Celsius 0x003a 040 057 000 Old_age Always
- 40 (0 17 0 0)
195 Hardware_ECC_Recovered 0x003e 070 061 000 Old_age Always
- 139751812
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x003e 100 100 000 Old_age Always
- 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 291 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
------------------------------------------------------------------------------
Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
easily build your RIAs with Flex Builder, the Eclipse(TM)based development
software that enables intelligent coding and step-through debugging.
Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
