-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Yo All!
A new drive not in the database:
HDT721010SLA360
See attached output of:
smartctl -a /dev/sdd > /tmp/HDT721010SLA360.txt
RGDS
GARY
- ---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97701
g...@rellim.com Tel:+1(541)382-8588
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.3 (GNU/Linux)
iD8DBQFKaM1PBmnRqz71OvMRAnbEAJ97lsVqPL0vUL8Zn8tWqY70lw/+dwCfZkfH
O/RT3QIubgjub2a/JDhU6FU=
=UTbj
-----END PGP SIGNATURE-----
smartctl version 5.38 [x86_64-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: Hitachi HDT721010SLA360
Serial Number: STF604MH0DJLLB
Firmware Version: ST6OA31B
User Capacity: 1,000,204,886,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Thu Jul 23 13:49:27 2009 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (14090) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 235) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 099 099 016 Pre-fail Always
- 131072
2 Throughput_Performance 0x0005 132 132 054 Pre-fail Offline
- 113
3 Spin_Up_Time 0x0007 100 100 024 Pre-fail Always
- 337
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always
- 6
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always
- 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always
- 0
8 Seek_Time_Performance 0x0005 125 125 020 Pre-fail Offline
- 33
9 Power_On_Hours 0x0012 100 100 000 Old_age Always
- 4004
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always
- 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 6
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always
- 167
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always
- 167
194 Temperature_Celsius 0x0002 181 181 000 Old_age Always
- 33 (Lifetime Min/Max 24/38)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always
- 35
SMART Error Log Version: 1
ATA Error Count: 35 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 35 occurred at disk power-on lifetime: 3875 hours (161 days + 11 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 f0 be 25 ed e3 Error: ICRC, ABRT 240 sectors at LBA = 0x03ed25be =
65873342
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 80 2e 24 ed e0 08 25d+14:23:41.600 READ DMA EXT
25 00 00 2e 20 ed e0 08 25d+14:23:41.600 READ DMA EXT
25 00 00 2e 1c ed e0 08 25d+14:23:41.600 READ DMA EXT
25 00 00 2e 18 ed e0 08 25d+14:23:41.500 READ DMA EXT
25 00 80 ae 14 ed e0 08 25d+14:23:41.500 READ DMA EXT
Error 34 occurred at disk power-on lifetime: 3875 hours (161 days + 11 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 20 0e f7 ad e3 Error: ICRC, ABRT 32 sectors at LBA = 0x03adf70e =
61732622
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 80 ae f6 ad e0 08 25d+14:22:06.000 READ DMA EXT
c8 00 80 2e f6 ad e3 08 25d+14:22:06.000 READ DMA
c8 00 80 ae f5 ad e3 08 25d+14:22:06.000 READ DMA
c8 00 00 ae f4 ad e3 08 25d+14:22:05.900 READ DMA
c8 00 00 ae f3 ad e3 08 25d+14:22:05.900 READ DMA
Error 33 occurred at disk power-on lifetime: 3875 hours (161 days + 11 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 ae ed 23 e3 Error: ICRC, ABRT at LBA = 0x0323edae = 52686254
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 80 2e ec 23 e0 08 25d+14:18:44.700 READ DMA EXT
25 00 00 2e e8 23 e0 08 25d+14:18:44.700 READ DMA EXT
c8 00 00 2e e7 23 e3 08 25d+14:18:44.700 READ DMA
25 00 00 2e e3 23 e0 08 25d+14:18:44.700 READ DMA EXT
25 00 00 2e df 23 e0 08 25d+14:18:44.700 READ DMA EXT
Error 32 occurred at disk power-on lifetime: 3875 hours (161 days + 11 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 50 de b1 7e e2 Error: ICRC, ABRT 80 sectors at LBA = 0x027eb1de =
41857502
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 2e b1 7e e2 08 25d+14:14:56.800 READ DMA
c8 00 00 2e b0 7e e2 08 25d+14:14:56.800 READ DMA
c8 00 80 ae af 7e e2 08 25d+14:14:56.800 READ DMA
c8 00 80 2e af 7e e2 08 25d+14:14:56.800 READ DMA
c8 00 80 ae ae 7e e2 08 25d+14:14:56.800 READ DMA
Error 31 occurred at disk power-on lifetime: 3875 hours (161 days + 11 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 ae 5d 33 e1 Error: ICRC, ABRT at LBA = 0x01335dae = 20143534
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 ae 5c 33 e0 08 25d+13:50:46.700 READ DMA EXT
25 00 00 ae 58 33 e0 08 25d+13:50:46.700 READ DMA EXT
c8 00 00 ae 57 33 e1 08 25d+13:50:46.700 READ DMA
25 00 00 ae 53 33 e0 08 25d+13:50:46.700 READ DMA EXT
25 00 00 ae 4f 33 e0 08 25d+13:50:46.700 READ DMA EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 3992 -
# 2 Short offline Completed without error 00% 3968 -
# 3 Short offline Completed without error 00% 3944 -
# 4 Extended offline Completed without error 00% 3941 -
# 5 Short offline Completed without error 00% 3920 -
# 6 Short offline Completed without error 00% 3896 -
# 7 Extended offline Interrupted (host reset) 80% 3875 -
# 8 Short offline Completed without error 00% 3872 -
# 9 Short offline Completed without error 00% 3848 -
#10 Short offline Completed without error 00% 3824 -
#11 Short offline Completed without error 00% 3800 -
#12 Short offline Completed without error 00% 3777 -
#13 Short offline Completed without error 00% 3753 -
#14 Short offline Completed without error 00% 3729 -
#15 Extended offline Completed without error 00% 3724 -
#16 Short offline Completed without error 00% 3705 -
#17 Short offline Completed without error 00% 3680 -
#18 Short offline Completed without error 00% 3656 -
#19 Short offline Completed without error 00% 3632 -
#20 Short offline Completed without error 00% 3608 -
#21 Short offline Completed without error 00% 3584 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
------------------------------------------------------------------------------
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
