smartctl 5.39 2009-08-08 r2872~ [x86_64-unknown-linux-gnu] (openSUSE RPM)
Copyright (C) 2002-9 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     SAMSUNG HM160HI
Serial Number:    S10UJQSQ501270
Firmware Version: HH100-12
User Capacity:    160,041,885,696 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   7
ATA Standard is:  ATA/ATAPI-7 T13 1532D revision 0
Local Time is:    Fri Jan  8 22:53:39 2010 WET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                 (  61) seconds.
Offline data collection
capabilities:                    (0x51) SMART execute Offline immediate.
                                        No Auto Offline data collection support.
                                        Suspend Offline collection upon new
                                        command.
                                        No Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  61) minutes.
SCT capabilities:              (0x003f) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  
WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   100   100   051    Pre-fail  Always       
-       2
  3 Spin_Up_Time            0x0007   252   252   025    Pre-fail  Always       
-       2000
  4 Start_Stop_Count        0x0032   098   098   000    Old_age   Always       
-       2429
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       
-       4
  7 Seek_Error_Rate         0x000f   252   252   051    Pre-fail  Always       
-       0
  8 Seek_Time_Performance   0x0025   252   252   015    Pre-fail  Offline      
-       0
  9 Power_On_Hours          0x0032   093   093   000    Old_age   Always       
-       3985
 10 Spin_Retry_Count        0x0033   100   100   051    Pre-fail  Always       
-       3
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       
-       417
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       
-       1224
184 Unknown_Attribute       0x0033   252   252   070    Pre-fail  Always       
-       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       
-       84
188 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       
-       87
190 Airflow_Temperature_Cel 0x0022   062   038   040    Old_age   Always   
In_the_past 38 (Lifetime Min/Max 10/62)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       
-       368
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       
-       88
193 Load_Cycle_Count        0x0032   090   090   000    Old_age   Always       
-       106545
194 Temperature_Celsius     0x0022   062   038   000    Old_age   Always       
-       38 (Lifetime Min/Max 10/62)
195 Hardware_ECC_Recovered  0x001a   100   100   000    Old_age   Always       
-       1330
196 Reallocated_Event_Count 0x0032   252   252   000    Old_age   Always       
-       0
197 Current_Pending_Sector  0x0012   252   100   000    Old_age   Always       
-       0
198 Offline_Uncorrectable   0x0030   252   252   000    Old_age   Offline      
-       0
199 UDMA_CRC_Error_Count    0x0036   200   200   000    Old_age   Always       
-       0
200 Multi_Zone_Error_Rate   0x000a   100   100   000    Old_age   Always       
-       3
201 Soft_Read_Error_Rate    0x0032   252   252   000    Old_age   Always       
-       0

SMART Error Log Version: 1
ATA Error Count: 66 (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 66 occurred at disk power-on lifetime: 3907 hours (162 days + 19 hours)
  When the command that caused the error occurred, the device was in an unknown 
state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 68 39 08 6c e1  Error: UNC 104 sectors at LBA = 0x016c0839 = 23857209

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 68 39 08 6c e1 00      04:32:59.750  READ DMA
  c8 00 08 31 08 6c e1 00      04:32:52.312  READ DMA
  ef 05 fe 00 00 00 40 00      04:32:52.312  SET FEATURES [Enable APM]
  c8 00 00 31 07 6c e1 00      04:32:52.312  READ DMA
  c8 00 18 f1 9c c6 e0 00      04:32:52.312  READ DMA

Error 65 occurred at disk power-on lifetime: 3669 hours (152 days + 21 hours)
  When the command that caused the error occurred, the device was in an unknown 
state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 38 97 2e 4f e2  Error: UNC 56 sectors at LBA = 0x024f2e97 = 38743703

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 38 97 2e 4f e2 00      00:51:52.937  READ DMA
  ef 05 80 00 00 00 40 00      00:51:45.437  SET FEATURES [Enable APM]
  c8 00 20 77 2e 4f e2 00      00:51:45.437  READ DMA
  c8 00 08 ef 06 44 e2 00      00:51:45.437  READ DMA
  c8 00 10 77 ed 3b e2 00      00:51:45.437  READ DMA

Error 64 occurred at disk power-on lifetime: 3560 hours (148 days + 8 hours)
  When the command that caused the error occurred, the device was in an unknown 
state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 40 6d bc 23 ee  Error: UNC 64 sectors at LBA = 0x0e23bc6d = 237223021

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 40 6d bc 23 ee 00      00:02:57.500  READ DMA
  c8 00 08 65 bc 23 ee 00      00:02:50.062  READ DMA
  c8 00 20 45 bc 23 ee 00      00:02:50.062  READ DMA
  c8 00 08 67 02 dc e1 00      00:02:50.062  READ DMA
  c8 00 40 b7 f4 e8 e2 00      00:02:50.000  READ DMA

Error 63 occurred at disk power-on lifetime: 3546 hours (147 days + 18 hours)
  When the command that caused the error occurred, the device was in an unknown 
state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 2f 03 2c e3  Error: UNC 8 sectors at LBA = 0x032c032f = 53216047

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 2f 03 2c e3 00      04:43:07.937  READ DMA
  c8 00 08 27 03 2c e3 00      04:43:00.500  READ DMA
  c8 00 08 1f 03 2c e3 00      04:43:00.500  READ DMA
  c8 00 08 17 03 2c e3 00      04:43:00.500  READ DMA
  c8 00 08 0f 03 2c e3 00      04:43:00.500  READ DMA

Error 62 occurred at disk power-on lifetime: 3479 hours (144 days + 23 hours)
  When the command that caused the error occurred, the device was in an unknown 
state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 a7 00 44 e2  Error: UNC 8 sectors at LBA = 0x024400a7 = 38011047

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 a7 00 44 e2 00      01:21:44.062  READ DMA
  ef 05 80 00 00 00 40 00      01:21:36.625  SET FEATURES [Enable APM]
  c8 00 08 87 00 44 e2 00      01:21:36.625  READ DMA
  c8 00 48 a7 ad 47 e2 00      01:21:36.562  READ DMA
  c8 00 20 87 ad 47 e2 00      01:21:36.562  READ DMA

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  
LBA_of_first_error
# 1  Short offline       Completed without error       00%      3984         -
# 2  Short offline       Completed without error       00%      3745         -
# 3  Extended offline    Completed without error       00%      3734         -
# 4  Short offline       Completed without error       00%      3727         -
# 5  Short offline       Completed without error       00%      3724         -
# 6  Short offline       Completed without error       00%      3717         -
# 7  Short offline       Completed without error       00%      3715         -
# 8  Short offline       Completed without error       00%      3711         -
# 9  Extended offline    Completed without error       00%      3707         -
#10  Short offline       Completed without error       00%      3699         -
#11  Short offline       Completed without error       00%      3693         -
#12  Short offline       Completed without error       00%      3689         -
#13  Short offline       Completed without error       00%      3682         -
#14  Short offline       Completed without error       00%      3676         -
#15  Extended offline    Completed without error       00%      3673         -
#16  Short offline       Completed without error       00%      3668         -
#17  Short offline       Completed without error       00%      3665         -
#18  Short offline       Completed without error       00%      3658         -
#19  Short offline       Completed without error       00%      3654         -
#20  Short offline       Completed without error       00%      3650         -
#21  Short offline       Completed without error       00%      3641         -

Note: selective self-test log revision number (0) not 1 implies that no 
selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been 
run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Completed [00% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Attachment: 0x32B14A9D.asc
Description: application/pgp-keys

<<attachment: carlosalmonteiro.vcf>>

------------------------------------------------------------------------------
Throughout its 18-year history, RSA Conference consistently attracts the
world's best and brightest in the field, creating opportunities for Conference
attendees to learn about information security's most important issues through
interactions with peers, luminaries and emerging and established companies.
http://p.sf.net/sfu/rsaconf-dev2dev
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database

Reply via email to