Attached is an entry for a missing disk, it's a 2.5" SATA hitachi.
Dump is from a couple of revs back smartmontools, but it seems, looking at the code, that this disk is missing from the very latest smartmontools.
Excellent software BTW!
smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: Hitachi HTE723232L9A360 Serial Number: 081011FC1403NQG606PC Firmware Version: FC4OC30F User Capacity: 320,072,933,376 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Not recognized. Minor revision code: 0x42 Local Time is: Thu Feb 11 15:20:11 2010 GMT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 247) Self-test routine in progress... 70% of test remaining. Total time to complete Offline data collection: ( 645) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 96) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0 3 Spin_Up_Time 0x0007 253 253 033 Pre-fail Always - 0 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 21 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0 9 Power_On_Hours 0x0012 092 092 000 Old_age Always - 3781 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 21 191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 21 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 179 194 Temperature_Celsius 0x0002 211 211 000 Old_age Always - 26 (Lifetime Min/Max 21/34) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 6 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 1 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 439 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 439 occurred at disk power-on lifetime: 3376 hours (140 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 d5 8b b7 7c e0 Error: UNC 213 sectors at LBA = 0x007cb78b = 8173451 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 f0 70 b7 7c e0 08 00:04:39.000 READ DMA EXT 25 00 f0 70 b7 7c e0 08 00:04:35.300 READ DMA EXT 25 00 f0 70 b7 7c e0 08 00:04:31.400 READ DMA EXT 25 00 f0 70 b7 7c e0 08 00:04:27.600 READ DMA EXT 25 00 f0 70 b7 7c e0 08 00:04:23.700 READ DMA EXT Error 438 occurred at disk power-on lifetime: 3376 hours (140 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 d5 8b b7 7c e0 Error: UNC 213 sectors at LBA = 0x007cb78b = 8173451 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 f0 70 b7 7c e0 08 00:04:35.300 READ DMA EXT 25 00 f0 70 b7 7c e0 08 00:04:31.400 READ DMA EXT 25 00 f0 70 b7 7c e0 08 00:04:27.600 READ DMA EXT 25 00 f0 70 b7 7c e0 08 00:04:23.700 READ DMA EXT 25 00 f0 70 b7 7c e0 08 00:04:19.700 READ DMA EXT Error 437 occurred at disk power-on lifetime: 3376 hours (140 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 d5 8b b7 7c e0 Error: UNC 213 sectors at LBA = 0x007cb78b = 8173451 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 f0 70 b7 7c e0 08 00:04:31.400 READ DMA EXT 25 00 f0 70 b7 7c e0 08 00:04:27.600 READ DMA EXT 25 00 f0 70 b7 7c e0 08 00:04:23.700 READ DMA EXT 25 00 f0 70 b7 7c e0 08 00:04:19.700 READ DMA EXT 25 00 f2 6e b7 7c e0 08 00:04:15.700 READ DMA EXT Error 436 occurred at disk power-on lifetime: 3376 hours (140 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 d5 8b b7 7c e0 Error: UNC 213 sectors at LBA = 0x007cb78b = 8173451 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 f0 70 b7 7c e0 08 00:04:27.600 READ DMA EXT 25 00 f0 70 b7 7c e0 08 00:04:23.700 READ DMA EXT 25 00 f0 70 b7 7c e0 08 00:04:19.700 READ DMA EXT 25 00 f2 6e b7 7c e0 08 00:04:15.700 READ DMA EXT 25 00 f2 6e b7 7c e0 08 00:04:11.900 READ DMA EXT Error 435 occurred at disk power-on lifetime: 3376 hours (140 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 d5 8b b7 7c e0 Error: UNC 213 sectors at LBA = 0x007cb78b = 8173451 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 f0 70 b7 7c e0 08 00:04:23.700 READ DMA EXT 25 00 f0 70 b7 7c e0 08 00:04:19.700 READ DMA EXT 25 00 f2 6e b7 7c e0 08 00:04:15.700 READ DMA EXT 25 00 f2 6e b7 7c e0 08 00:04:11.900 READ DMA EXT 25 00 f2 6e b7 7c e0 08 00:04:08.100 READ DMA EXT SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 90% 3376 33471361 # 2 Short offline Completed without error 00% 3376 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
--
Lawrence Manning Lead Developer SmoothWall Ltd 1 John Charles Way Leeds LS12 6QA United Kingdom 1 800 959 3760 (USA, Canada and North America) 0870 1 999 500 (United Kingdom) +44 870 1 999 500 (All other countries) SmoothWall is registered in England: 4298247This email and any attachments transmitted with it are confidential to the intended recipient(s) and may not be communicated to any other person or published by any means without the permission of SmoothWall Limited. Any opinions stated in this message are solely those of the author. See: http://smoothwall.net/company/email.php for the full text of this notice.
------------------------------------------------------------------------------ SOLARIS 10 is the OS for Data Centers - provides features such as DTrace, Predictive Self Healing and Award Winning ZFS. Get Solaris 10 NOW http://p.sf.net/sfu/solaris-dev2dev
_______________________________________________ Smartmontools-database mailing list Smartmontools-database@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/smartmontools-database
