Below are the URLs and the smartctl output for the OCZ Deneva 2 6.0 Gb/s SATA SSD Drive
http://www.oczenterprise.com/products/ssd.html # smartctl -i -r ioctl,2 /dev/sdd smartctl 5.42 2011-06-09 r3367M [x86_64-linux-2.6.18-238.19.1.el5] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net [inquiry: 12 00 00 00 24 00 ] scsi_status=0x0, host_status=0x0, driver_status=0x0 info=0x0 duration=0 milliseconds resid=0 Incoming data, len=36: 00 00 00 05 02 5b 00 00 00 41 54 41 20 20 20 20 20 10 44 32 43 53 54 4b 32 35 31 4d 31 31 2d 30 32 34 20 32 2e 30 38 status=0x0 [ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ] scsi_status=0x0, host_status=0x0, driver_status=0x0 info=0x0 duration=8 milliseconds resid=0 Incoming data, len=512 [only first 256 bytes shown]: 00 5a 0c ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00 10 00 00 00 00 43 4f 2d 5a 35 33 39 37 56 37 34 31 20 39 30 37 58 4f 43 36 38 00 00 00 00 04 00 2e 32 30 38 30 00 00 00 00 32 44 53 43 4b 54 35 32 4d 31 40 31 31 30 2d 34 32 20 30 20 20 20 20 20 20 20 20 50 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80 60 00 40 00 2f 00 40 00 02 00 02 07 00 ff 3f 10 00 70 3f 00 10 fc fb 00 10 01 ff ff ff 0f 00 00 07 00 80 03 00 78 00 78 00 78 00 78 00 00 4f 00 00 00 00 90 00 00 00 00 00 00 1f 00 0e c7 04 00 4c 00 40 00 a0 fc 03 10 01 6b 74 69 74 63 61 29 74 49 b4 63 61 b0 7f 40 01 00 00 00 fe 00 fe ff 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 b0 44 f2 1b 00 00 00 00 d0 00 00 01 00 00 40 00 00 83 5e 7f a9 5e 23 d5 3b e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1e 40 f0 1c 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 status=0x0 REPORT-IOCTL: Device=/dev/sdd Command=IDENTIFY DEVICE Input: FR=...., SC=0x01, LL=...., LM=...., LH=...., DEV=...., CMD=0xec IN [ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ] scsi_status=0x0, host_status=0x0, driver_status=0x0 info=0x0 duration=10 milliseconds resid=0 Incoming data, len=512 [only first 256 bytes shown]: 00 5a 0c ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00 10 00 00 00 00 43 4f 2d 5a 35 33 39 37 56 37 34 31 20 39 30 37 58 4f 43 36 38 00 00 00 00 04 00 2e 32 30 38 30 00 00 00 00 32 44 53 43 4b 54 35 32 4d 31 40 31 31 30 2d 34 32 20 30 20 20 20 20 20 20 20 20 50 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80 60 00 40 00 2f 00 40 00 02 00 02 07 00 ff 3f 10 00 70 3f 00 10 fc fb 00 10 01 ff ff ff 0f 00 00 07 00 80 03 00 78 00 78 00 78 00 78 00 00 4f 00 00 00 00 90 00 00 00 00 00 00 1f 00 0e c7 04 00 4c 00 40 00 a0 fc 03 10 01 6b 74 69 74 63 61 29 74 49 b4 63 61 b0 7f 40 01 00 00 00 fe 00 fe ff 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 b0 44 f2 1b 00 00 00 00 d0 00 00 01 00 00 40 00 00 83 5e 7f a9 5e 23 d5 3b e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1e 40 f0 1c 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 status=0x0 REPORT-IOCTL: Device=/dev/sdd Command=IDENTIFY DEVICE returned 0 ===== [IDENTIFY DEVICE] DATA START (BASE-16) ===== 000-015: 5a 0c ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00 |Z..?7.......?...| 016-031: 00 00 00 00 43 4f 2d 5a 35 33 39 37 56 37 34 31 |....CO-Z5397V741| 032-047: 39 30 37 58 4f 43 36 38 00 00 00 00 04 00 2e 32 |907XOC68.......2| 048-063: 38 30 00 00 00 00 32 44 53 43 4b 54 35 32 4d 31 |80....2DSCKT52M1| 064-079: 31 31 30 2d 34 32 20 30 20 20 20 20 20 20 20 20 |110-42 0 | 080-095: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80 | ..| 096-111: 00 40 00 2f 00 40 00 02 00 02 07 00 ff 3f 10 00 |.@./.@.......?..| 112-127: 3f 00 10 fc fb 00 10 01 ff ff ff 0f 00 00 07 00 |?...............| 128-143: 03 00 78 00 78 00 78 00 78 00 00 4f 00 00 00 00 |..x.x.x.x..O....| 144-159: 00 00 00 00 00 00 1f 00 0e c7 04 00 4c 00 40 00 |............L.@.| 160-175: fc 03 10 01 6b 74 69 74 63 61 29 74 49 b4 63 61 |....ktitca)tI.ca| 176-191: 7f 40 01 00 00 00 fe 00 fe ff 00 00 00 00 00 00 |.@..............| 192-207: 00 00 00 00 00 00 00 00 b0 44 f2 1b 00 00 00 00 |.........D......| 208-223: 00 00 01 00 00 40 00 00 83 5e 7f a9 5e 23 d5 3b |.....@...^..^#.;| 224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1e 40 |...............@| 240-255: 1c 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |.@..............| 256-271: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 336-351: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 400-415: 00 00 00 00 00 00 00 00 00 00 00 00 21 00 00 00 |............!...| 416-431: 00 00 00 40 00 00 00 00 00 01 00 00 00 00 00 00 |...@............| 432-447: 00 00 01 00 00 00 00 00 00 00 00 00 3f 10 00 00 |............?...| 448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a5 52 |...............R| ===== [IDENTIFY DEVICE] DATA END (512 Bytes) ===== === START OF INFORMATION SECTION === Device Model: D2CSTK251M11-0240 Serial Number: OCZ-35797V1409X7CO86 LU WWN Device Id: 5 e83a97 f235e3bd5 Firmware Version: 2.08 User Capacity: 240,057,409,536 bytes [240 GB] Sector Size: 512 bytes logical/physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ACS-2 revision 3 Local Time is: Tue Sep 6 10:14:59 2011 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled # smartctl -a /dev/sdd smartctl 5.42 2011-06-09 r3367M [x86_64-linux-2.6.18-238.19.1.el5] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: D2CSTK251M11-0240 Serial Number: OCZ-35797V1409X7CO86 LU WWN Device Id: 5 e83a97 f235e3bd5 Firmware Version: 2.08 User Capacity: 240,057,409,536 bytes [240 GB] Sector Size: 512 bytes logical/physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ACS-2 revision 3 Local Time is: Tue Sep 6 10:18:38 2011 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7f) SMART execute Offline immediate. Auto Offline data collection on/off support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 48) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0021) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 120 120 050 Pre-fail Always - 0 5 Reallocated_Sector_Ct 0x0033 100 100 003 Pre-fail Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 142945101545474 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 8 171 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0 172 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0 174 Unknown_Attribute 0x0030 000 000 000 Old_age Offline - 8 177 Wear_Leveling_Count 0x0000 000 000 000 Old_age Offline - 0 181 Program_Fail_Cnt_Total 0x0032 000 000 000 Old_age Always - 0 182 Erase_Fail_Count_Total 0x0032 000 000 000 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0022 128 129 000 Old_age Always - 128 (Min/Max 127/129) 195 Hardware_ECC_Recovered 0x001c 100 100 000 Old_age Offline - 0 196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0 201 Soft_Read_Error_Rate 0x001c 100 100 000 Old_age Offline - 0 204 Soft_ECC_Correction 0x001c 100 100 000 Old_age Offline - 0 230 Head_Amplitude 0x0013 100 100 000 Pre-fail Always - 197242078101604 231 Temperature_Celsius 0x0013 100 100 010 Pre-fail Always - 0 233 Media_Wearout_Indicator 0x0000 000 000 000 Old_age Offline - 220 234 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 1564 241 Total_LBAs_Written 0x0032 000 000 000 Old_age Always - 1564 242 Total_LBAs_Read 0x0032 000 000 000 Old_age Always - 1180 SMART Error Log not supported SMART Self-test Log not supported SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. # smartctl -x /dev/sdd smartctl 5.42 2011-06-09 r3367M [x86_64-linux-2.6.18-238.19.1.el5] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: D2CSTK251M11-0240 Serial Number: OCZ-35797V1409X7CO86 LU WWN Device Id: 5 e83a97 f235e3bd5 Firmware Version: 2.08 User Capacity: 240,057,409,536 bytes [240 GB] Sector Size: 512 bytes logical/physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ACS-2 revision 3 Local Time is: Tue Sep 6 10:18:53 2011 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7f) SMART execute Offline immediate. Auto Offline data collection on/off support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 48) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0021) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 120 120 050 - 0 5 Reallocated_Sector_Ct PO--CK 100 100 003 - 0 9 Power_On_Hours -O--CK 100 100 000 - 152840706195458 12 Power_Cycle_Count -O--CK 100 100 000 - 8 171 Unknown_Attribute -O--CK 000 000 000 - 0 172 Unknown_Attribute -O--CK 000 000 000 - 0 174 Unknown_Attribute ----CK 000 000 000 - 8 177 Wear_Leveling_Count ------ 000 000 000 - 0 181 Program_Fail_Cnt_Total -O--CK 000 000 000 - 0 182 Erase_Fail_Count_Total -O--CK 000 000 000 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 194 Temperature_Celsius -O---K 128 129 000 - 128 (Min/Max 127/129) 195 Hardware_ECC_Recovered --SRC- 100 100 000 - 0 196 Reallocated_Event_Count PO--CK 100 100 003 - 0 201 Soft_Read_Error_Rate --SRC- 100 100 000 - 0 204 Soft_ECC_Correction --SRC- 100 100 000 - 0 230 Head_Amplitude PO--C- 100 100 000 - 197242078101604 231 Temperature_Celsius PO--C- 100 100 010 - 0 233 Media_Wearout_Indicator ------ 000 000 000 - 220 234 Unknown_Attribute -O--CK 000 000 000 - 1564 241 Total_LBAs_Written -O--CK 000 000 000 - 1564 242 Total_LBAs_Read -O--CK 000 000 000 - 1180 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] GP/S Log at address 0x00 has 1 sectors [Log Directory] GP Log at address 0x07 has 1 sectors [Extended self-test log] SMART Log at address 0x09 has 1 sectors [Selective self-test log] GP Log at address 0x10 has 1 sectors [NCQ Command Error] GP/S Log at address 0x11 has 1 sectors [SATA Phy Event Counters] GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] GP/S Log at address 0xb7 has 16 sectors [Device vendor specific log] GP Log at address 0xd0 has 65535 sectors [Device vendor specific log] SMART Log at address 0xd0 has 255 sectors [Device vendor specific log] GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log not supported SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 0 (0x0000) SCT Support Level: 1 Device State: Active (0) Current Temperature: ? Celsius Power Cycle Min/Max Temperature: ?/ ? Celsius Lifetime Min/Max Temperature: ?/ ? Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: ?/ ? Celsius Min/Max Temperature Limit: ?/ ? Celsius Temperature History Size (Index): 478 (1) Index Estimated Time Temperature Celsius 2 2011-09-06 02:21 ? - ... ..(476 skipped). .. - 1 2011-09-06 10:18 ? - Warning: device does not support SCT Error Recovery Control command SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 6 Device-to-host register FISes sent due to a COMRESET 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x0002 4 0 R_ERR response for data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS ------------------------------------------------------------------------------ Special Offer -- Download ArcSight Logger for FREE! Finally, a world-class log management solution at an even better price-free! And you'll get a free "Love Thy Logs" t-shirt when you download Logger. Secure your free ArcSight Logger TODAY! http://p.sf.net/sfu/arcsisghtdev2dev _______________________________________________ Smartmontools-database mailing list Smartmontools-database@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/smartmontools-database
