Below are the URLs and the smartctl output for the Crucial C400 256GB 6.0 Gb/s SATA SSD Drive
# smartctl -i -r ioctl,2 /dev/sdd smartctl 5.42 2011-06-09 r3367M [x86_64-linux-2.6.18-238.19.1.el5] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net [inquiry: 12 00 00 00 24 00 ] scsi_status=0x0, host_status=0x0, driver_status=0x0 info=0x0 duration=0 milliseconds resid=0 Incoming data, len=36: 00 00 00 05 02 5b 00 00 00 41 54 41 20 20 20 20 20 10 43 34 30 30 2d 4d 54 46 44 44 41 43 32 35 36 4d 20 30 30 30 32 status=0x0 [ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ] scsi_status=0x0, host_status=0x0, driver_status=0x0 info=0x0 duration=1 milliseconds resid=0 Incoming data, len=512 [only first 256 bytes shown]: 00 40 04 ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00 10 00 00 00 00 30 30 30 30 30 30 30 30 31 31 33 32 20 33 30 31 31 46 32 35 36 00 00 00 00 00 00 30 30 30 32 30 20 20 20 20 34 43 30 30 4d 2d 46 54 44 44 40 43 41 35 32 4d 36 4d 41 20 20 20 20 20 20 20 20 50 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80 60 00 40 00 2f 01 40 00 00 00 00 07 00 ff 3f 10 00 70 3f 00 10 fc fb 00 10 01 ff ff ff 0f 00 00 07 00 80 03 00 78 00 78 00 78 00 78 00 00 40 00 00 00 00 90 00 00 00 00 00 00 1f 00 0e 17 04 00 4c 00 40 00 a0 f8 03 28 00 6b 74 09 7d 63 61 69 74 09 bc 63 61 b0 3f 20 01 00 01 00 fe 00 fe ff 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 b0 32 cf 1d 00 00 00 00 d0 00 00 08 00 00 40 00 00 0a 50 51 07 11 03 65 2f e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1e 40 f0 1c 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 status=0x0 REPORT-IOCTL: Device=/dev/sdd Command=IDENTIFY DEVICE Input: FR=...., SC=0x01, LL=...., LM=...., LH=...., DEV=...., CMD=0xec IN [ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ] scsi_status=0x0, host_status=0x0, driver_status=0x0 info=0x0 duration=1 milliseconds resid=0 Incoming data, len=512 [only first 256 bytes shown]: 00 40 04 ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00 10 00 00 00 00 30 30 30 30 30 30 30 30 31 31 33 32 20 33 30 31 31 46 32 35 36 00 00 00 00 00 00 30 30 30 32 30 20 20 20 20 34 43 30 30 4d 2d 46 54 44 44 40 43 41 35 32 4d 36 4d 41 20 20 20 20 20 20 20 20 50 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80 60 00 40 00 2f 01 40 00 00 00 00 07 00 ff 3f 10 00 70 3f 00 10 fc fb 00 10 01 ff ff ff 0f 00 00 07 00 80 03 00 78 00 78 00 78 00 78 00 00 40 00 00 00 00 90 00 00 00 00 00 00 1f 00 0e 17 04 00 4c 00 40 00 a0 f8 03 28 00 6b 74 09 7d 63 61 69 74 09 bc 63 61 b0 3f 20 01 00 01 00 fe 00 fe ff 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 b0 32 cf 1d 00 00 00 00 d0 00 00 08 00 00 40 00 00 0a 50 51 07 11 03 65 2f e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1e 40 f0 1c 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 status=0x0 REPORT-IOCTL: Device=/dev/sdd Command=IDENTIFY DEVICE returned 0 ===== [IDENTIFY DEVICE] DATA START (BASE-16) ===== 000-015: 40 04 ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00 |@..?7.......?...| 016-031: 00 00 00 00 30 30 30 30 30 30 30 30 31 31 33 32 |....000000001132| 032-047: 33 30 31 31 46 32 35 36 00 00 00 00 00 00 30 30 |3011F256......00| 048-063: 32 30 20 20 20 20 34 43 30 30 4d 2d 46 54 44 44 |20 4C00M-FTDD| 064-079: 43 41 35 32 4d 36 4d 41 20 20 20 20 20 20 20 20 |CA52M6MA | 080-095: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80 | ..| 096-111: 00 40 00 2f 01 40 00 00 00 00 07 00 ff 3f 10 00 |.@./.@.......?..| 112-127: 3f 00 10 fc fb 00 10 01 ff ff ff 0f 00 00 07 00 |?...............| 128-143: 03 00 78 00 78 00 78 00 78 00 00 40 00 00 00 00 |..x.x.x.x..@....| 144-159: 00 00 00 00 00 00 1f 00 0e 17 04 00 4c 00 40 00 |............L.@.| 160-175: f8 03 28 00 6b 74 09 7d 63 61 69 74 09 bc 63 61 |..(.kt.}cait..ca| 176-191: 3f 20 01 00 01 00 fe 00 fe ff 00 00 00 00 00 00 |? ..............| 192-207: 00 00 00 00 00 00 00 00 b0 32 cf 1d 00 00 00 00 |.........2......| 208-223: 00 00 08 00 00 40 00 00 0a 50 51 07 11 03 65 2f |.....@...PQ...e/| 224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1e 40 |...............@| 240-255: 1c 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |.@..............| 256-271: 21 00 30 30 32 30 30 2e 2e 31 30 30 00 00 00 00 |!.00200..100....| 272-287: 00 00 34 35 30 35 20 20 20 20 41 34 37 4c 34 35 |..4505 A47L45| 288-303: 39 34 20 20 20 20 00 00 00 00 00 00 00 00 00 00 |94 ..........| 304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 336-351: 03 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 400-415: 00 00 00 00 00 00 00 00 00 00 00 00 3d 00 00 00 |............=...| 416-431: 00 00 00 40 00 00 00 00 00 00 01 00 00 00 00 00 |...@............| 432-447: 00 00 01 00 00 00 00 00 00 00 00 00 3f 10 00 00 |............?...| 448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 464-479: 00 00 00 00 01 00 ff 00 00 00 00 00 00 00 00 00 |................| 480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a5 8f |................| ===== [IDENTIFY DEVICE] DATA END (512 Bytes) ===== === START OF INFORMATION SECTION === Device Model: C400-MTFDDAC256MAM Serial Number: 00000000112303112F65 LU WWN Device Id: 5 00a075 103112f65 Firmware Version: 0002 User Capacity: 256,060,514,304 bytes [256 GB] Sector Size: 512 bytes logical/physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 6 Local Time is: Tue Sep 6 10:23:52 2011 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled # smartctl -a /dev/sdd smartctl 5.42 2011-06-09 r3367M [x86_64-linux-2.6.18-238.19.1.el5] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: C400-MTFDDAC256MAM Serial Number: 00000000112303112F65 LU WWN Device Id: 5 00a075 103112f65 Firmware Version: 0002 User Capacity: 256,060,514,304 bytes [256 GB] Sector Size: 512 bytes logical/physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 6 Local Time is: Tue Sep 6 10:24:12 2011 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (10235) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 19) minutes. Conveyance self-test routine recommended polling time: ( 3) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 100 050 Pre-fail Always - 0 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 9 Power_On_Hours 0x0032 100 100 001 Old_age Always - 635 12 Power_Cycle_Count 0x0032 100 100 001 Old_age Always - 6 170 Unknown_Attribute 0x0033 100 100 010 Pre-fail Always - 0 171 Unknown_Attribute 0x0032 100 100 001 Old_age Always - 0 172 Unknown_Attribute 0x0032 100 100 001 Old_age Always - 0 173 Unknown_Attribute 0x0033 100 100 010 Pre-fail Always - 0 174 Unknown_Attribute 0x0032 100 100 001 Old_age Always - 0 181 Program_Fail_Cnt_Total 0x0022 100 100 001 Old_age Always - 0 183 Runtime_Bad_Block 0x0032 100 100 001 Old_age Always - 0 184 End-to-End_Error 0x0033 100 100 050 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 001 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 001 Old_age Always - 0 189 High_Fly_Writes 0x000e 100 100 001 Old_age Always - 105 195 Hardware_ECC_Recovered 0x003c 100 100 001 Old_age Offline - 0 196 Reallocated_Event_Count 0x0032 100 100 001 Old_age Always - 0 197 Current_Pending_Sector 0x0032 100 100 001 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 001 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 100 100 001 Old_age Always - 0 202 Data_Address_Mark_Errs 0x0018 100 100 001 Old_age Offline - 0 206 Flying_Height 0x000e 100 100 001 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Vendor (0xff) Completed without error 00% 632 - # 2 Vendor (0xff) Completed without error 00% 619 - # 3 Vendor (0xff) Completed without error 00% 606 - # 4 Vendor (0xff) Completed without error 00% 594 - # 5 Vendor (0xff) Completed without error 00% 581 - # 6 Vendor (0xff) Completed without error 00% 568 - # 7 Vendor (0xff) Completed without error 00% 555 - # 8 Vendor (0xff) Completed without error 00% 543 - # 9 Vendor (0xff) Completed without error 00% 530 - #10 Vendor (0xff) Completed without error 00% 517 - #11 Vendor (0xff) Completed without error 00% 505 - #12 Vendor (0xff) Completed without error 00% 492 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. # smartctl -x /dev/sdd smartctl 5.42 2011-06-09 r3367M [x86_64-linux-2.6.18-238.19.1.el5] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: C400-MTFDDAC256MAM Serial Number: 00000000112303112F65 LU WWN Device Id: 5 00a075 103112f65 Firmware Version: 0002 User Capacity: 256,060,514,304 bytes [256 GB] Sector Size: 512 bytes logical/physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 6 Local Time is: Tue Sep 6 10:24:29 2011 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (10235) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 19) minutes. Conveyance self-test routine recommended polling time: ( 3) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 100 100 001 - 635 12 Power_Cycle_Count -O--CK 100 100 001 - 6 170 Unknown_Attribute PO--CK 100 100 010 - 0 171 Unknown_Attribute -O--CK 100 100 001 - 0 172 Unknown_Attribute -O--CK 100 100 001 - 0 173 Unknown_Attribute PO--CK 100 100 010 - 0 174 Unknown_Attribute -O--CK 100 100 001 - 0 181 Program_Fail_Cnt_Total -O---K 100 100 001 - 0 183 Runtime_Bad_Block -O--CK 100 100 001 - 0 184 End-to-End_Error PO--CK 100 100 050 - 0 187 Reported_Uncorrect -O--CK 100 100 001 - 0 188 Command_Timeout -O--CK 100 100 001 - 0 189 High_Fly_Writes -OSR-- 100 100 001 - 105 195 Hardware_ECC_Recovered --SRCK 100 100 001 - 0 196 Reallocated_Event_Count -O--CK 100 100 001 - 0 197 Current_Pending_Sector -O--CK 100 100 001 - 0 198 Offline_Uncorrectable ----CK 100 100 001 - 0 199 UDMA_CRC_Error_Count -O--CK 100 100 001 - 0 202 Data_Address_Mark_Errs ---RC- 100 100 001 - 0 206 Flying_Height -OSR-- 100 100 001 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] GP/S Log at address 0x00 has 1 sectors [Log Directory] SMART Log at address 0x01 has 1 sectors [Summary SMART error log] SMART Log at address 0x02 has 51 sectors [Comprehensive SMART error log] GP Log at address 0x03 has 16383 sectors [Ext. Comprehensive SMART error log] GP/S Log at address 0x04 has 255 sectors [Device Statistics] SMART Log at address 0x06 has 1 sectors [SMART self-test log] GP Log at address 0x07 has 3449 sectors [Extended self-test log] SMART Log at address 0x09 has 1 sectors [Selective self-test log] GP Log at address 0x10 has 1 sectors [NCQ Command Error] GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] GP Log at address 0xa0 has 2000 sectors [Device vendor specific log] SMART Log at address 0xa0 has 208 sectors [Device vendor specific log] GP/S Log at address 0xa1 has 1 sectors [Device vendor specific log] GP/S Log at address 0xa2 has 1 sectors [Device vendor specific log] GP/S Log at address 0xa3 has 1 sectors [Device vendor specific log] GP/S Log at address 0xa4 has 1 sectors [Device vendor specific log] GP/S Log at address 0xa5 has 1 sectors [Device vendor specific log] GP/S Log at address 0xa6 has 1 sectors [Device vendor specific log] GP/S Log at address 0xa7 has 1 sectors [Device vendor specific log] GP/S Log at address 0xa8 has 1 sectors [Device vendor specific log] GP/S Log at address 0xa9 has 1 sectors [Device vendor specific log] GP/S Log at address 0xaa has 1 sectors [Device vendor specific log] GP/S Log at address 0xab has 1 sectors [Device vendor specific log] GP/S Log at address 0xac has 1 sectors [Device vendor specific log] GP/S Log at address 0xad has 1 sectors [Device vendor specific log] GP/S Log at address 0xae has 1 sectors [Device vendor specific log] GP/S Log at address 0xaf has 1 sectors [Device vendor specific log] GP/S Log at address 0xb0 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb1 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb2 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb3 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb4 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb5 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb6 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb7 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb8 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb9 has 1 sectors [Device vendor specific log] GP/S Log at address 0xba has 1 sectors [Device vendor specific log] GP/S Log at address 0xbb has 1 sectors [Device vendor specific log] GP/S Log at address 0xbc has 1 sectors [Device vendor specific log] GP/S Log at address 0xbd has 1 sectors [Device vendor specific log] GP/S Log at address 0xbe has 1 sectors [Device vendor specific log] GP/S Log at address 0xbf has 1 sectors [Device vendor specific log] GP Log at address 0xc0 has 80 sectors [Device vendor specific log] GP/S Log at address 0xc1 has 1 sectors [Device vendor specific log] GP/S Log at address 0xc2 has 1 sectors [Device vendor specific log] GP/S Log at address 0xc3 has 1 sectors [Device vendor specific log] GP/S Log at address 0xc4 has 1 sectors [Device vendor specific log] GP/S Log at address 0xc5 has 1 sectors [Device vendor specific log] GP/S Log at address 0xc6 has 1 sectors [Device vendor specific log] GP/S Log at address 0xc7 has 1 sectors [Device vendor specific log] GP/S Log at address 0xc8 has 1 sectors [Device vendor specific log] GP/S Log at address 0xc9 has 1 sectors [Device vendor specific log] GP/S Log at address 0xca has 1 sectors [Device vendor specific log] GP/S Log at address 0xcb has 1 sectors [Device vendor specific log] GP/S Log at address 0xcc has 1 sectors [Device vendor specific log] GP/S Log at address 0xcd has 1 sectors [Device vendor specific log] GP/S Log at address 0xce has 1 sectors [Device vendor specific log] GP/S Log at address 0xcf has 1 sectors [Device vendor specific log] GP/S Log at address 0xd0 has 1 sectors [Device vendor specific log] GP/S Log at address 0xd1 has 1 sectors [Device vendor specific log] GP/S Log at address 0xd2 has 1 sectors [Device vendor specific log] GP/S Log at address 0xd3 has 1 sectors [Device vendor specific log] GP/S Log at address 0xd4 has 1 sectors [Device vendor specific log] GP/S Log at address 0xd5 has 1 sectors [Device vendor specific log] GP/S Log at address 0xd6 has 1 sectors [Device vendor specific log] GP/S Log at address 0xd7 has 1 sectors [Device vendor specific log] GP/S Log at address 0xd8 has 1 sectors [Device vendor specific log] GP/S Log at address 0xd9 has 1 sectors [Device vendor specific log] GP/S Log at address 0xda has 1 sectors [Device vendor specific log] GP/S Log at address 0xdb has 1 sectors [Device vendor specific log] GP/S Log at address 0xdc has 1 sectors [Device vendor specific log] GP/S Log at address 0xdd has 1 sectors [Device vendor specific log] GP/S Log at address 0xde has 1 sectors [Device vendor specific log] GP/S Log at address 0xdf has 1 sectors [Device vendor specific log] GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] SMART Extended Comprehensive Error Log size 16383 not supported SMART Error Log Version: 1 No Errors Logged SMART Extended Self-test Log size 3449 not supported SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Vendor (0xff) Completed without error 00% 632 - # 2 Vendor (0xff) Completed without error 00% 619 - # 3 Vendor (0xff) Completed without error 00% 606 - # 4 Vendor (0xff) Completed without error 00% 594 - # 5 Vendor (0xff) Completed without error 00% 581 - # 6 Vendor (0xff) Completed without error 00% 568 - # 7 Vendor (0xff) Completed without error 00% 555 - # 8 Vendor (0xff) Completed without error 00% 543 - # 9 Vendor (0xff) Completed without error 00% 530 - #10 Vendor (0xff) Completed without error 00% 517 - #11 Vendor (0xff) Completed without error 00% 505 - #12 Vendor (0xff) Completed without error 00% 492 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) SCT Support Level: 0 Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: ? Celsius Power Cycle Min/Max Temperature: ?/ ? Celsius Lifetime Min/Max Temperature: ?/ ? Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: -5/75 Celsius Temperature History Size (Index): 478 (408) Index Estimated Time Temperature Celsius 409 2011-09-03 02:50 ? - ... ..(476 skipped). .. - 408 2011-09-06 10:20 ? - SCT Error Recovery Control: Read: 40 (4.0 seconds) Write: 40 (4.0 seconds) SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x000a 4 6 Device-to-host register FISes sent due to a COMRESET ------------------------------------------------------------------------------ Special Offer -- Download ArcSight Logger for FREE! Finally, a world-class log management solution at an even better price-free! And you'll get a free "Love Thy Logs" t-shirt when you download Logger. Secure your free ArcSight Logger TODAY! http://p.sf.net/sfu/arcsisghtdev2dev _______________________________________________ Smartmontools-database mailing list Smartmontools-database@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/smartmontools-database
