Below are the URL and the smartctl output for the OCZ Z-Drive R4 CM84 PCI Express Solid State Drive
http://www.oczenterprise.com/ssd-products/z-drive-r4-r-series.html # smartctl -i -r ioctl,2 /dev/sdb smartctl 5.43 2011-10-20 r3459M [x86_64-linux-2.6.18-238.19.1.el5] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net [inquiry: 12 00 00 00 24 00 ] scsi_status=0x0, host_status=0x0, driver_status=0x0 info=0x0 duration=3 milliseconds resid=0 Incoming data, len=36: 00 00 00 05 02 1f 2f 00 13 41 54 41 20 20 20 20 20 10 4f 43 5a 20 5a 2d 44 52 49 56 45 20 52 34 20 43 20 32 2e 31 33 status=0x0 [ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ] scsi_status=0x0, host_status=0x0, driver_status=0x0 info=0x0 duration=10 milliseconds resid=0 Incoming data, len=512 [only first 256 bytes shown]: 00 5a 0c ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00 10 00 00 00 00 43 4f 2d 5a 37 31 36 41 33 39 50 30 20 49 37 34 59 35 34 39 5a 00 00 00 00 04 00 2e 32 30 33 31 20 20 20 20 43 4f 20 5a 2d 5a 52 44 56 49 40 20 45 34 52 43 20 38 4d 20 34 20 20 20 20 20 20 50 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80 60 00 40 00 2f 00 40 00 02 00 02 07 00 ff 3f 10 00 70 3f 00 10 fc fb 00 10 01 fd 25 de 45 00 00 07 00 80 03 00 78 00 78 00 78 00 78 00 00 4f 00 00 00 00 90 00 00 00 00 00 00 1f 00 0e c7 06 00 4c 00 40 00 a0 fc 01 10 01 6b 74 01 74 63 61 69 74 09 b4 63 61 b0 7f 40 01 00 00 00 fe 00 fe ff 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 fd 25 de 45 00 00 00 00 d0 00 00 01 00 00 40 00 00 83 5e 7e a9 5d 23 7e b8 e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1e 40 f0 1c 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 status=0x0 REPORT-IOCTL: Device=/dev/sdb Command=IDENTIFY DEVICE Input: FR=...., SC=0x01, LL=...., LM=...., LH=...., DEV=...., CMD=0xec IN [ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ] scsi_status=0x0, host_status=0x0, driver_status=0x0 info=0x0 duration=9 milliseconds resid=0 Incoming data, len=512 [only first 256 bytes shown]: 00 5a 0c ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00 10 00 00 00 00 43 4f 2d 5a 37 31 36 41 33 39 50 30 20 49 37 34 59 35 34 39 5a 00 00 00 00 04 00 2e 32 30 33 31 20 20 20 20 43 4f 20 5a 2d 5a 52 44 56 49 40 20 45 34 52 43 20 38 4d 20 34 20 20 20 20 20 20 50 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80 60 00 40 00 2f 00 40 00 02 00 02 07 00 ff 3f 10 00 70 3f 00 10 fc fb 00 10 01 fd 25 de 45 00 00 07 00 80 03 00 78 00 78 00 78 00 78 00 00 4f 00 00 00 00 90 00 00 00 00 00 00 1f 00 0e c7 06 00 4c 00 40 00 a0 fc 01 10 01 6b 74 01 74 63 61 69 74 09 b4 63 61 b0 7f 40 01 00 00 00 fe 00 fe ff 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 fd 25 de 45 00 00 00 00 d0 00 00 01 00 00 40 00 00 83 5e 7e a9 5d 23 7e b8 e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1e 40 f0 1c 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 status=0x0 REPORT-IOCTL: Device=/dev/sdb Command=IDENTIFY DEVICE returned 0 ===== [IDENTIFY DEVICE] DATA START (BASE-16) ===== 000-015: 5a 0c ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00 |Z..?7.......?...| 016-031: 00 00 00 00 43 4f 2d 5a 37 31 36 41 33 39 50 30 |....CO-Z716A39P0| 032-047: 49 37 34 59 35 34 39 5a 00 00 00 00 04 00 2e 32 |I74Y549Z.......2| 048-063: 33 31 20 20 20 20 43 4f 20 5a 2d 5a 52 44 56 49 |31 CO Z-ZRDVI| 064-079: 20 45 34 52 43 20 38 4d 20 34 20 20 20 20 20 20 | E4RC 8M 4 | 080-095: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80 | ..| 096-111: 00 40 00 2f 00 40 00 02 00 02 07 00 ff 3f 10 00 |.@./.@.......?..| 112-127: 3f 00 10 fc fb 00 10 01 fd 25 de 45 00 00 07 00 |?........%.E....| 128-143: 03 00 78 00 78 00 78 00 78 00 00 4f 00 00 00 00 |..x.x.x.x..O....| 144-159: 00 00 00 00 00 00 1f 00 0e c7 06 00 4c 00 40 00 |............L.@.| 160-175: fc 01 10 01 6b 74 01 74 63 61 69 74 09 b4 63 61 |....kt.tcait..ca| 176-191: 7f 40 01 00 00 00 fe 00 fe ff 00 00 00 00 00 00 |.@..............| 192-207: 00 00 00 00 00 00 00 00 fd 25 de 45 00 00 00 00 |.........%.E....| 208-223: 00 00 01 00 00 40 00 00 83 5e 7e a9 5d 23 7e b8 |.....@...^~.]#~.| 224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1e 40 |...............@| 240-255: 1c 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |.@..............| 256-271: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 336-351: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 400-415: 00 00 00 00 00 00 00 00 00 00 00 00 21 00 00 00 |............!...| 416-431: 00 00 00 40 00 00 00 00 00 01 00 00 00 00 00 00 |...@............| 432-447: 00 00 01 00 00 00 00 00 00 00 00 00 3f 10 00 00 |............?...| 448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a5 e1 |................| ===== [IDENTIFY DEVICE] DATA END (512 Bytes) ===== === START OF INFORMATION SECTION === Device Model: OCZ Z-DRIVE R4 CM84 Serial Number: OCZ-17A6930P7IY445Z9 LU WWN Device Id: 5 e83a97 e235db87e Firmware Version: 2.13 User Capacity: 600,159,549,952 bytes [600 GB] Sector Size: 512 bytes logical/physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ACS-2 revision 3 Local Time is: Thu Oct 20 13:38:08 2011 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled # smartctl -a /dev/sdb smartctl 5.43 2011-10-20 r3459M [x86_64-linux-2.6.18-238.19.1.el5] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: OCZ Z-DRIVE R4 CM84 Serial Number: OCZ-17A6930P7IY445Z9 LU WWN Device Id: 5 e83a97 e235db87e Firmware Version: 2.13 User Capacity: 600,159,549,952 bytes [600 GB] Sector Size: 512 bytes logical/physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ACS-2 revision 3 Local Time is: Thu Oct 20 13:38:39 2011 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 2097) seconds. Offline data collection capabilities: (0x7f) SMART execute Offline immediate. Auto Offline data collection on/off support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 48) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0021) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 089 089 050 Pre-fail Always - 25417609 5 Reallocated_Sector_Ct 0x0033 100 100 003 Pre-fail Always - 0 (5, 0) 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 188596308934679 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 104449309671426 171 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 281062659850240 172 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 177017077104640 174 Unknown_Attribute 0x0030 000 000 000 Old_age Offline - 280993940373510 177 Wear_Leveling_Count 0x0000 000 000 000 Old_age Offline - 231992658493440 181 Program_Fail_Cnt_Total 0x0032 000 000 000 Old_age Always - 280444184559616 182 Erase_Fail_Count_Total 0x0032 000 000 000 Old_age Always - 238589728260096 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 281066182934528 194 Temperature_Celsius 0x0022 128 129 000 Old_age Always - 128 (0 127 0 129 0) 195 Hardware_ECC_Recovered 0x001c 120 120 000 Old_age Offline - 25417609 196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0 (57343, 0) 201 Soft_Read_Error_Rate 0x001c 120 120 000 Old_age Offline - 25417609 204 Soft_ECC_Correction 0x001c 120 120 000 Old_age Offline - 25417609 230 Head_Amplitude 0x0013 100 100 000 Pre-fail Always - 280995320947711 231 Temperature_Celsius 0x0013 100 100 010 Pre-fail Always - 252887674388384 233 Media_Wearout_Indicator 0xff90 255 255 000 Old_age Offline - 280514385143551 234 Unknown_Attribute 0xe7ff 018 081 000 Pre-fail Always - 256186209271568 241 Total_LBAs_Written 0x0032 000 000 000 Old_age Always - 280444184582241 242 Total_LBAs_Read 0x0032 000 000 000 Old_age Always - 258380937581844 255 Unknown_Attribute 0xecff 177 247 --- Pre-fail Always - 261683767410448 224 Load_Friction 0xff20 255 255 --- Old_age Offline - 280447834779391 255 Unknown_Attribute 0xefff 175 252 --- Pre-fail Always - 264982302293920 187 Reported_Uncorrect 0xff10 255 255 000 Old_age Offline - 281066393825791 255 Unknown_Attribute 0xf2ff 127 193 --- Pre-fail Always - 268280837177232 192 Power-Off_Retract_Count 0xffa0 255 255 --- Old_age Offline - 280996681348351 255 Unknown_Attribute 0xf5ff 079 162 --- Pre-fail Always - 271579372060576 SMART Error Log not supported SMART Self-test Log not supported SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. # smartctl -x /dev/sdb smartctl 5.43 2011-10-20 r3459M [x86_64-linux-2.6.18-238.19.1.el5] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: OCZ Z-DRIVE R4 CM84 Serial Number: OCZ-17A6930P7IY445Z9 LU WWN Device Id: 5 e83a97 e235db87e Firmware Version: 2.13 User Capacity: 600,159,549,952 bytes [600 GB] Sector Size: 512 bytes logical/physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ACS-2 revision 3 Local Time is: Thu Oct 20 13:38:57 2011 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 2097) seconds. Offline data collection capabilities: (0x7f) SMART execute Offline immediate. Auto Offline data collection on/off support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 48) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0021) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 092 092 050 - 28910993 5 Reallocated_Sector_Ct PO--CK 100 100 003 - 0 (5, 0) 9 Power_On_Hours -O--CK 100 100 000 - 191173289312279 12 Power_Cycle_Count -O--CK 100 100 000 - 104449309671426 171 Unknown_Attribute -O--CK 000 000 000 - 281062659850240 172 Unknown_Attribute -O--CK 000 000 000 - 177017077104640 174 Unknown_Attribute ----CK 000 000 000 - 280993940373510 177 Wear_Leveling_Count ------ 000 000 000 - 231992658493440 181 Program_Fail_Cnt_Total -O--CK 000 000 000 - 280444184559616 182 Erase_Fail_Count_Total -O--CK 000 000 000 - 238589728260096 187 Reported_Uncorrect -O--CK 100 100 000 - 281066182934528 194 Temperature_Celsius -O---K 128 129 000 - 128 (0 127 0 129 0) 195 Hardware_ECC_Recovered --SRC- 120 120 000 - 28910993 196 Reallocated_Event_Count PO--CK 100 100 003 - 0 (57343, 0) 201 Soft_Read_Error_Rate --SRC- 120 120 000 - 28910993 204 Soft_ECC_Correction --SRC- 120 120 000 - 28910993 230 Head_Amplitude PO--C- 100 100 000 - 280995320947711 231 Temperature_Celsius PO--C- 100 100 010 - 252887674388384 233 Media_Wearout_Indicator ----C-+ 255 255 000 - 280514385143551 234 Unknown_Attribute POSRCK+ 018 081 000 - 256186209271568 241 Total_LBAs_Written -O--CK 000 000 000 - 280444184582241 242 Total_LBAs_Read -O--CK 000 000 000 - 258380937581852 255 Unknown_Attribute POSRCK+ 177 247 --- - 261683767410448 224 Load_Friction -----K+ 255 255 --- - 280447834779391 255 Unknown_Attribute POSRCK+ 175 252 --- - 264982302293920 187 Reported_Uncorrect ----C-+ 255 255 000 - 281066393825791 255 Unknown_Attribute POSRCK+ 127 193 --- - 268280837177232 192 Power-Off_Retract_Count -----K+ 255 255 --- - 280996681348351 255 Unknown_Attribute POSRCK+ 079 162 --- - 271579372060576 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] GP/S Log at address 0x00 has 1 sectors [Log Directory] GP Log at address 0x07 has 1 sectors [Extended self-test log] SMART Log at address 0x09 has 1 sectors [Selective self-test log] GP Log at address 0x10 has 1 sectors [NCQ Command Error log] GP/S Log at address 0x11 has 1 sectors [SATA Phy Event Counters] GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] GP/S Log at address 0xb7 has 16 sectors [Device vendor specific log] GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log not supported SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 0 (0x0000) SCT Support Level: 1 Device State: Active (0) Current Temperature: ? Celsius Power Cycle Min/Max Temperature: 127/-127 Celsius Lifetime Min/Max Temperature: 0/ 0 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: ?/ ? Celsius Min/Max Temperature Limit: ?/ ? Celsius Temperature History Size (Index): 478 (20) Index Estimated Time Temperature Celsius 21 2011-10-17 06:00 ? - ... ..(476 skipped). .. - 20 2011-10-20 13:30 ? - Warning: device does not support SCT Error Recovery Control command SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x0002 2 0 R_ERR response for data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS ------------------------------------------------------------------------------ The demand for IT networking professionals continues to grow, and the demand for specialized networking skills is growing even more rapidly. Take a complimentary Learning@Cisco Self-Assessment and learn about Cisco certifications, training, and career opportunities. http://p.sf.net/sfu/cisco-dev2dev _______________________________________________ Smartmontools-database mailing list Smartmontools-database@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/smartmontools-database
